Search:

Hmmm, refrigerant and oil leak, then flame from burners ignited it all when it called for heat ? Ive seen a couple bakelite compressor terminals blow and scatter oil like that, never seen the oil...

Like Dean mentioned, the black coupling should be replaced, preferably w a valve at that point (tapered iron pipe).

Yes, the fitting is a standard transition. CSST needs a grounding bond #6 wire by approved local means. A union after gas shutoff required for working on furnace.

It appears to be a CSST male straight fitting (CSST to MIP). The gas ball valve should be located at that point, with a BIP union between it and the furnace.

Tomorrow should be cats

Read this carefully, it may apply to you, if so, you have 15 days to enroll. https://www.nolo.com/legal-encyclopedia/will-you-qualify-obamacare-tax-credits-2014.html

I had a short term plan last...

Install a filter rack afterwards?

I use an old Baso switch I carry often for the magnet test

Very crucial. Refrigerant migrates to the coolest part of the system during off cycles. They prevent liquid refrigerant from accumulating in compressor crankcase and pumping out the oil or worse,...

X3. In many areas (rightfully so) ventless are illegal, and aside from the potential CO issues and oxygen depletion, they release high amounts of moisture and smell bad. At the very least the...

All furnaces manufactured after 7/3/19 are required to have ECM motors. Daikin included if that is what you are looking for. A convertible 2 stg can be wired as either a single stg or 2 stg.
The...

I believe Article III was written into the constitution for non elected traitors such as Arnold and others. Concerns then were much different and fear of becoming a monarchy or falling under...

I just bought a new Frigidaire (Electrolux) Mod FFTR2021TW2. Shopped for simple low cost unit, upper freezer w icemaker. Lowes had the best deals. 20.4 cu ft. $52 yr op.cost (430kw) lower forced air...

Talk to neighbors and coworkers also. Get at least 3 local bids and write down Qs to ask. Starting out the bid process usually irons out the best contractors and work proposals needed. Keeps...

Sections 2.2 & 2.3 in instructions address use of different diameters of vent pipes and reducer location.

ANYWAY, Looks like soon, BANG, ZOOM, and up to the moon ! https://www.nasa.gov/exploration/systems/sls/index.html

What about recent developments with Space X launching of CrewDragon and Boeings Starliner? The docking adapters are already installed on the station. This will help to commercialize the process as...

What I don't "get" is how citizens conceptualize that by electing a president, Trump or any other, the chief of the executive branch is going to "fix" everything. While he has influence in many...

I would have had the furnace serviced and repaired, (to get operational), and billed and collected. If softener needed shut down and moved immediately for that to happen, that would be included....

I did recently purchase a Kel-Tec PMR 30, 22 magnum semi auto pistol. It has a lightweight composite frame, doesn't jam & w 4, 30 round clips, I don't have to aim well. It's just a fun lil plinker w...

True but not legal, and too much chance for wounding and suffering

I also use a 30.06 Mossberg 100ATR, but like with you, it's a bit punchy. Funny I have a Remington mod 700 270 that I use more often. Ammo for both always common even in small towns as I don't...

Thanx rundawg for the link

I never could figure out that terminal, still cant for diagnostics. But it's nice to know now what it should be reading. No info about what to do if it's beyond parameters

Many older furnaces, usually the pilot type, are set up that way. I do not ground them, leave them original.

It would be best to hire a local Co. to supervise any movement. A leak at the unit is a common problem as is kinked copper tubing. Depending on line length and position, it may be able to be moved...

So, possibly running all thread thru bolt holes just off center, 2 on each rib, same on next rib, for 4 legs to bolt to horizontal trusses for heater mounting.

Duracrack :LOL:
I haven't heard that one, but I been away for awhile

Yea Roy, Then there's the stupid arsonists. That may explain the rest of the "unkosherness" :(

Missouri guy, Nice history! :grin2: Now if I can remember where my keys are :rolleyes:

VTP99 - :cheers:

People cause 80% + fire; cigarettes, gas powered tools, hot mufflers, welding, fireworks, campfires etc. The timing has to do with dryness and winds

I'de ask to see the building specs, requirements and recommended procedures for installing ceiling loads, if its a prebuilt, otherwise an engineer to rubber stamp such if homemade. If electrician is...

We consider it a (category 4) condensing furnace . I'm sure they define it otherwise.

I just remembered my old username, password. Let's try 1st post since then here. :playing:

sure. good luck:D

Its a 2 way radio used for buisiness communications.

I wonder if you can buy a house online and have some guys on the side install it?:rolleyes:

Hope you guys have a nice date Seasonheating and Dice,
Do us all a favor and don't post results.;)

I just keep smoking, a lot.:confused:

I disagree. Have an electrician check out your service box, and check grounding.:rolleyes:

Are children involved?

How much do your pets eat? I have a Lab about 70 lbs. he eats 6 cups of dry dog food with 1/2 cup canned mixed daily. He's 2 1'2 years old.
?

That's OK. Carry on:cool:

soon

there

be

I was looking for replies from 5 digit posters you grasshoppers. Those that spend more time in front of a screen than anything else.:rolleyes:
You,ll

It only took me 9 years.


What are you 5 digit guys talking so much about?


:confused:

Excuse me, that would be 8 years. ( just seems like 9 ).

Focus on a different method , Jimmy. You'll be glad you did.;)

Duct mastic.