Search:

Makes too much sense. Then broom pushers are doing the "maintenance".

Broad details at this point, yup.

The main input I had in the design phase was 1/3 2/3 valve setup, don’t care what size the coil is. Space sensors need to be quality. Got what I asked for...

Love the tbox sites with all the default actions on the comandable points. The broom pusher has used the set, override and em override actions and set them all to different yet insane values.

Nothing changes unless you want the $hit striped out by default...which is the only option now.

Uh, what's the rub? Am I missing something?

If they really want to push the ads, they will move...

No drama, works better than expected. Wish I could say that more often lol.

Saw them rolling in some equipment and they had the airlock doors propped open wide open. See the manager hovering...

That's kinda what code signing does. You just need to sort out what store its being checked against which changes depending on where its running. If its selfie signed and code signing is required,...

Like even numbers, call it $2/month. Seems reasonable not to have ads plastered everywhere and hopefully keep the house of cards from crumbling.

Well you left that detail out. Never messed with themes. Would think that's going to be checking against WB's trust store. Off memory thats under tools - ax cert management. Sounds like you upset...

Your code signing cert was signed by a selfie CA in your user trust store if you followed the directions. The station your trying to run your module on has its own trust store. If the station...

If your using a selfie cert you need to add the CA's pub key to the station trust store in order for it to trust a selfie signed module.

Well this experiment has about wrapped up.

870933
870935
870937
870939

Firing the customer is always an option.

You want me to deal with this clearly non-warranty crap several times a week? Its T&M and I may not have the T to offer and you clearly can't self-install...

Looking at the screen shots of the unaltered site, not going to deal with that. There are a ton of ways to strip that crap with a low hassle bar. Then there are sites that are very aggressive and...

You try a new serial cable between the view and IQ4? Maybe its just something shorted in the cable.

Lol. And you want a easy way to do this on a few thousand logs. Guess I would carefully review what I signed up for. If it was just handing over the data, well here you go. They should be able to...

Something hosed.

You could try removing the pair or conductor that carries power for the RD style sensors. Maybe something in the view is shorting that power supply. Hail Mary really.

Would be nice if they just offered a paid account that strips the crap out. It can be fun blocking ads, but it can become a game of wack-a-mole and just not worth the time.

Was thinking the same. Low oil shutoffs are very common on small engines.

Having a suitable port on the gearbox is prob the bigger issue.

UBO has a ton of stuff I never knew about.

The element picker allows you just to click on an offending element on a page and it will create a custom filter to kill it. Sick of the announcement...

A true purest.

hvac-talk.com###HVAC-Talk_com_728x90_Top_HG_Forum

Get UBO in the settings - my filters, copy paste that crap in and hit apply.

I have shown you the path, but I can't walk it for you lol.

You can apparently smoke the <div> tags that contain the ads with UBO custom filters. Who knew?

Ad block removes the content from showing, but the space is still there. Remove the whole div and...

Look at that, all back to normal. Starchie for the win.

In thread empty spaces, these seem to clean that up.

hvac-talk.com###HVAC-Talk_com_728x90_InThread_HG_Forum0...

Gotcha, that's an OG version from way back.

It certainly shouldn't be killing the IQ4 when you connect the serial cable between them. If you cannot get a serial connection to the IQ4 with SET,...

Been getting them directly from their website. Normally have them in about a week.

Well if I understand you correctly, if you can't get SET connected to this IQ4 via the serial cable it's certainly not going to work with the view. Smells like a hardware issue, but that's a best...

Shocking. But hey, sometimes you need a browser that just accepts whatever to get to that one off website every few months.

Get this with customer machines and what a jarring experience that is. Ad loaded, auto play bs, and list tracking scripts a page long. Not normally browsing the nets on their machines so its pretty...

Phone's all ad blocked as well, just bigger spaces between the post than on PC.

Lol. I was also wondering what these blanks where. Never crossed my mind it was ads being nixed.

Ad blockers seem to have no problem filtering them out.

There is a controls sales sub forum.

Alot of this stuff isn't prob worth a ton. Supervisor? You shipping the whole machine?

Tridium stuff. Without version numbers and license options,...

Get your own email server, they cost almost nothing. Easily justify the cost for the customers that have no IT and little if any hard requirements over the tech time saved per year. Either the...

Lets say you run into one star with HW's current solution.

They have a single port 10/100M standard Ethernet to single port T1L adapter. If I run into a vav that has one extra MS/TP cable its a 3...

HW typical roll out.

I will say I have 4-5 different vendors of T1L gear here for testing now. It all seems to work as well together as standard Ethernet. Interoperability isn't my main concern...

Referring to the Phoenix T1L switch.

I didn't get the feeling HW has sold a ton of these T1L controllers either yet. Anything SPE/T1L is very new yet.

Good reason for that.

They kicked this product off with a small run of units. Like 50 or 100 units total. Most ended up in the EU, a handful ended up here in the states. They have been waiting...

Never heard back from Datamate either. Left voicemail and used their contact us form. Guessing that SPF module is vaporware today.

DC powered, requires SPE specific cable ends which will need to be field terminated. Its not available yet either. Just ran a small run of them. Should have stock later this year.

Belimo has valves / flow measuring options that can spit out glycol concentration reasonably priced.

The main question is the specs for this measurement?

Aka rather cheap 10G switch interconnect within a rack. Fiber about any flavor, copper >1G, etc. Their nice to have ports if you have gear with them.

Would rather have a native T1L port right on...

Called their other number which went straight to VM yesterday. Left a message, still haven't heard anything.

Since they don't seem to be available anywhere (no pictures of actual units even...)...

Wow. Wonder how many of those they have sold? Can I count them on one hand or do I need both lol.

Least it has standard terminal blocks vs one of SPE specific connectors.



Out of...

Would also note what moneywell specifies for T1L cable and distances.

Order it with the right MFT programing code and don't worry about the hassle if its a common PWM timebase.
...

No doubt about it, have a handful of these visiting the home test board.

Really seems a 24VAC powered switch that has say 3-4 T1L ports with and one 10/100MB port is needed. Right now, T1L...

Pull your selector out?

This is what you can expect for which zone is what fixtures.

If they have a controller that does a large area with multiple circuits, the number in the colored area of each tag on the left is...

Wasn't very impressed.

They have to have everything programed and setup before your going to discover anything. I would wait as long as possible after they do. If they make changes and don't pay...

Search for one to many links.

Its explained here many times. There are prob even a handful of YT vidz on it.

https://www.youtube.com/watch?v=W0CRATk37I8

They also normally go over this in...

Off memory under the router table, you want to add a new one. You spell out which network is behind the router, then spell out the IP & port # which is in hex. So 192.168.0.10 & 47808 for the port...