Search:

X2

Just start asking your customers if there's anything else you can do for them :)

There are a few reasons for it. One being that I have done more than just work on appliances, which would have involved me in more conversations that just this small area of the forum.

I can go...

I think Brady in NC is a franchise operation. I could be wrong

Nah, after one reply from you am tired of reading lmao

The only one I've ever had to replace is the probe in the sump, and it was because a short from the booster heater burned the wires to it.

LOL nobody has

My service truck is 50k. Am not running around with 500 thousand miles on it lol

Ok, just wait till you see the new AM15 :)

Either control board or keypad. Most likely the keypad.

The AM15 has a pumped rinse. It will never reach 20 psig on rinse pressure.

Has anyone checked the pump impeller?

With recent aquisitions and such, am almost always supporting a competitor lol

Usually 3wire, partstown, allpoints, heritage, and Whaley if the local office has the part in hand...

Nobody cares ;)

It's not underpowered, it's just not a good dough machine.

Find a motor shop near you. They can really work wonders. They should be able to rewind your motor to work with your circumstances. If...

Amen!!!

Make sure you break the 500 dollar oil pump too...

Wow, so this is a diy site now?

The water level probe is just a piece of metal that when the water touches it allows a path to ground to let the control board know the water has reached that level.

You wasted your money on new...

Too much detergent causes lots of weird things with the water level probes. Also some types of detergents seem to throw the sensors for a loop.

Set to detergent and adjust the amount of detergent...

Cam phone hell.... someone needs to buy a new dish machine.

I work on OV500's all day long. None of them have a MUA unit...

The oven has a relay to control exhaust.

Nothing FOR MUA

That's ridiculous.

These big companies are cutting off their nose to spite their face.

Should make things a lot easier and profitable for small shops...

Uh, yeah, Ecolab is a straight commission based pay. You have to be a salesman.

Was this growing pains?

Anyone currently working for this company have anything to add?

Is always a good idea to follow the installation destructions....

It's all a damn joke anyways.

WTF are they talking about getting rid of 404a??? Somebody is about to lose a lot of money cause a patent is running out???

The EPA is a joke! Their primary...

85 degree room and you don't want to fix it???

Call 2 pros... one for the high temp and ventilation. One for the refrigeration.

I've had a set of SMAN4 for a year now without a single problem. Haven't even had to replace the batteries yet

You left and your box was still 50 degrees.

You're in a hot pull down. Your pressures are going to be high. And 180 head on R22 is undercharged. Most people set HP controls no less than 200 psig....

Is that ice on the wall?

If so, you have a problem with infiltration.

On all HL mixers the timer function is in the motor controller (VFD) If you have a timer issue, it will either be the cable or the 100 dollar VFD.

Good find on the issue :)

They probably damaged the temp probe. I have an outback near my house that I have to replace the temp probe on every 3-4 months like clockwork. I keep 2 on the truck. They have 2 pitcos tgat use the...

Wow, so they're your competition.

I wouldn't order from them if they're running service.

LOL your opinion is junk :)

You also need to consider that you're pushing that discharge gas from the pump all the way to the evap, and the evap is far more efficient than the condenser.

What are you stick welding?

Most everything I've run into has been thin, less than 10 gauge... probably less than 12 gauge.

I carry a miller tig on the truck and a bottle of argon.

I just...

407c would be a good one IMO.

427a is practically a direct drop in for 22 high temp units

438a is literally a direct drop in, however it drops discharge temps which would not be desirable in a...

Do you understand how a HP works?

Also resi units work on 20 delta across evap, unlike refrigeration floating around the 10 mark.

So, to heat a home to 72 degrees F, you'd want to run the...

1 hp used to be a ton of high temp. Before voodoo refirefrigeration came along and coils started getting as big as 70's model lincoln town cars.... now they're pushing 3/4 hp a ton.

Look at the...

The Scotsman's are certainly a lot easier to work on, clean, and they have fewer refrigeration problems. Least in my experience in Scotsman versus manI

I've still got the HS36 meter I bought while I was still in trade school 10-11 years ago. It works just fine.

Although, I do take care of my tools and equipment. I cannot speak for others.

I dunno... the flaring tool has been around a lot longer and has the same benefits as this tool claims... if not more.

See comments from the manufacturer, but I don't understand what the solution is.... :confused:

Any of you guys weld stainless?

Which method do you prefer?
How often do you weld?
If infrequent, how do you stay in practice?

Need to see chart on 404a at high temp to determine if it would be worth it. I doubt it woukd be.

It was a typo. I believe it's fixed now

Fun is over :(

I heard that you just sit in the truck and the meter tells you what's wrong with the system.

Just ordered mine, you better get yours before they sell out!!!


http://www.trutechtools.com/Fieldpiece-SC620-Loaded-Clamp-Meter_p_3668.html

Amen! Someone finally tells it like it is!

No textbook fairies on this site in 2013!

Guess CO2 rack systems are just all wrong...