Search:

Type: Posts; User: dave1234

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. So really it can be boils down to redundancy I.e...

    So really it can be boils down to redundancy I.e failsafe which I ruled out initially right away. Bypass janitor accidentally bumps the selector switch to bypass (assuming it's a TRUE bypass drive...
  2. Why are pressure differentia/ bypass valves still installed on vfd pumps??

    Can't understand why bypass valves are still installed when the pumps are vfd driven when differential drives the pump speed. Failsafe is never an engineering concern so I've ruled that out right away
  3. Replies
    10
    Views
    1,218

    Oil line temp. Cold and sweating - and I'm not...

    Oil line temp. Cold and sweating - and I'm not joking- a few good whacks with soft blow hammer- you'll be amazed. We all joke about hitting things with hammers but an old timer rack King showed me...
  4. Supco- bullet tube chart just need gas and comp hp

    Supco- bullet tube chart just need gas and comp hp
  5. Replies
    18
    Views
    1,482

    Seriously though lack of water flow a1 culprit...

    Seriously though lack of water flow a1 culprit for ice clog between plates especially on hoshis
  6. Replies
    18
    Views
    1,482

    X2 and X3 We use the special food grade butter...

    X2 and X3
    We use the special food grade butter round hereya. Never ever margerine though. That would be bad.
  7. Replies
    8
    Views
    814

    Rarely have to worry about it because Imperial -...

    Rarely have to worry about it because Imperial - and JB very close second if not a tie- are king!!!!
  8. Replies
    10
    Views
    728

    The Bacharach H10 is very very sensitive-so much...

    The Bacharach H10 is very very sensitive-so much so that it can be misleading. If thatís the route you go be sure to bubble to pinpoint. My initial go to is to pressurize the snot out of it with...
  9. Calibrating temperature on fluke VOMs with temp

    Naturally cost like anyone else is a factor but I invest in quality as in the long run an error because I donít trust or have faulty stuff costs me more in the long run. I always stand by my personal...
  10. Good to know. Iím torn between a new 52 and a...

    Good to know. Iím torn between a new 52 and a cooper. Although through all this I have deduced that they type K adapters are garbage and even my dusty old UEI ( which I only bought because I liked...
  11. You mean the Fluke 52? Sent from my iPhone...

    You mean the Fluke 52?


    Sent from my iPhone using Tapatalk
  12. Slightly confused as the pipe clamp for cooper of...

    Slightly confused as the pipe clamp for cooper of the same model boasts thermistor type while coopers actual site says itís a type K thermocouple


    Sent from my iPhone using Tapatalk
  13. Exactly why on my installs I always install some...

    Exactly why on my installs I always install some pressure access inside in a convenient location.


    Sent from my iPhone using Tapatalk
  14. Then again I just read up on the fluke 52 and...

    Then again I just read up on the fluke 52 and itís operating temp only goes to 14*


    Sent from my iPhone using Tapatalk
  15. Certainly looks like a good product however the...

    Certainly looks like a good product however the 0*F ambient operation temperature could be problematic where I live- itís not uncommon to need to measure superheat/subcool in subzero outside...
  16. I missed that- nice Sent from my iPhone...

    I missed that- nice


    Sent from my iPhone using Tapatalk
  17. Just not finding a cooper pipe clamp- sorta...

    Just not finding a cooper pipe clamp- sorta problematic for me personally. Thereís on that says itís I pipe probe but looks just like I regular probe. Plus says only measures up to 1 3/8Ē- not much...
  18. Gonna look into cooper temperature products-...

    Gonna look into cooper temperature products- although the the dual temp feature on the fluke 52 is nice


    Sent from my iPhone using Tapatalk
  19. This has become a wealth of knowledge of QUALITY...

    This has become a wealth of knowledge of QUALITY when measuring temperature. In a nutshell I personally am no longer using the adapter. Has anyone else used the Fluke 52? Iím know in the market for a...
  20. Forgive my ignorance but if meter has sat long...

    Forgive my ignorance but if meter has sat long enough to stabilize temperature is that not the same? I mean it should display ambient temperature


    Sent from my iPhone using Tapatalk
  21. Thatís just fine and almost preferred so long as...

    Thatís just fine and almost preferred so long as itís reliable and accurate- although as I think about it when you short your leads together in temp mode
    It should display ambient temp and even that...
  22. Hands down I believe you are absolutely correct...

    Hands down I believe you are absolutely correct regarding the type K banana adapter- I dug out an old UEI that hadnít even been turned on in over ten years and it just has the two prongs- no adapter-...
  23. Oh know I see- you can calibrate it Sent...

    Oh know I see- you can calibrate it


    Sent from my iPhone using Tapatalk
  24. This is good to know- whoever I must wonder...

    This is good to know- whoever I must wonder whatís the difference


    Sent from my iPhone using Tapatalk
  25. A fluke 902 and another with model I forget. I...

    A fluke 902 and another with model I forget. I have just the plain type k thermocouple with adapter- Iím saying when you short the regular meter leads on temp setting it displays ambient temperature....
  26. Calibrating temperature on fluke VOMs with temp

    To check calibration is easy enough- to adjust it is a whole other story. I took the thing apart looking for some sort of adjustment pot- nope. All I know is if you short the leads on temp setting it...
  27. It really should be outside the room. Sent...

    It really should be outside the room.


    Sent from my iPhone using Tapatalk
  28. Handheld Refrigerant Detector for Fire Department

    Hmmmm... while it's not a bad idea to have a chiller plant of that size should have refrigerant monitors out side the mechanical room. Also at given ppm set point an exhaust system should kick on. I...
  29. Replies
    20
    Views
    767

    I'm confused- are we trying to manufacture a...

    I'm confused- are we trying to manufacture a boiler? Pretty much all OEMs use at least some licensed products from other manufacturers even though they may stick their stickers on them. I mean look...
  30. Replies
    20
    Views
    767

    Make immersion NTC

    Damn straight- similar yes- but even harder to clean up then aluminum based anti-seize. I provides the Honeywell part number in previous post. Messy stuff- I light dip of sensor before putting into...
  31. Replies
    38
    Views
    2,050

    X3 Sent from my iPhone using Tapatalk

    X3


    Sent from my iPhone using Tapatalk
  32. Replies
    20
    Views
    767

    Your quest after ingenuity is admirable but I...

    Your quest after ingenuity is admirable but I really think your gonna spend more in the long run not to mention valuable mind time- retract what i said earlier about immersion well and pipe size...
  33. Replies
    1
    Views
    365

    Had bad luck with UEI stuff but mainly meters....

    Had bad luck with UEI stuff but mainly meters. The JB Atlas has served me well and seems to last a long time on a single battery. It shuts off on its on once weight change stops after not sure how...
  34. Replies
    38
    Views
    2,050

    Don't forget 2 hours of fire watch after brazing...

    Don't forget 2 hours of fire watch after brazing


    Sent from my iPhone using Tapatalk
  35. Replies
    20
    Views
    767

    X2- also are you hell bent on an immersion well?...

    X2- also are you hell bent on an immersion well? If it's a wall hung I'm gonna go out on a limb and say the primary loop or really wherever you plan to put it pipe is a little smaller than typical...
  36. Replies
    4
    Views
    1,913

    Yeah the zoomlock compatibly was more of a...

    Yeah the zoomlock compatibly was more of a curiosity. I tried it once- did one fitting and by the time I prepped it "by the book" I was like I could've sweat 5 fittings. More for fire watch concerns ...
  37. Replies
    4
    Views
    1,913

    Rigid vs Milwaukee pro press

    Just wondering thoughts on each and experiences- also wondering if both offer separate jaw sets for pex. Looking at possibly purchasing cordless one as I'm tired of fighting over them at shop. Also...
  38. Replies
    11
    Views
    745

    Socket Organization

    One of my constituents does the same- pouch and all. One of those type of dudes don't matter what it is the most odd ball part or thing and he always has it in his pouch or in his pocket. I don't...
  39. Replies
    11
    Views
    745

    I have a little metal box that I got at a garage...

    I have a little metal box that I got at a garage sale says pocket fishermen. Sure sockets are loose but still surprisingly easy to find when needed.


    Sent from my iPhone using Tapatalk
  40. Replies
    6
    Views
    681

    Hoses not vacuum rated? Can you expand on that a...

    Hoses not vacuum rated? Can you expand on that a little- I've owned quite a few hoses including yellow and have never heard of such a thing. Not doubting or negating what your saying- just never...
  41. In tight corners yes I've had that as well ...

    In tight corners yes I've had that as well


    Sent from my iPhone using Tapatalk
  42. I have one- had a few months. Hasn't fallen apart...

    I have one- had a few months. Hasn't fallen apart or rounded out yet and I exclusively use it with peanut. Sure I'll lose before it fails


    Sent from my iPhone using Tapatalk
  43. Replies
    16
    Views
    1,210

    Interesting. Maybe send it in for calibration? I...

    Interesting. Maybe send it in for calibration? I wish they-same can be said for all test instruments period regardless of make- would release the black magic and voodoo that goes into calibration. I...
  44. Replies
    16
    Views
    1,210

    Sorry I forgot to ask- what kind of problems did...

    Sorry I forgot to ask- what kind of problems did you start having after cleaning. Also what is the wireless like a Bluetooth thing?


    Sent from my iPhone using Tapatalk
  45. Replies
    16
    Views
    1,210

    How did you clean it with rubbing alcohol? I only...

    How did you clean it with rubbing alcohol? I only ask cause that's what Suppco said when I had one of there's which eventually conked out but as far as am aware not because of that. Interesting you...
  46. Replies
    16
    Views
    1,210

    Supernova. I find JB products are pretty solid....

    Supernova. I find JB products are pretty solid. Although the cord seems to be fraying on mine but she's had rough service life and keeps on ticking


    Sent from my iPhone using Tapatalk
  47. Replies
    32
    Views
    1,499

    I stressed the urgency to the people but...

    I stressed the urgency to the people but facilities leads/head maintenance/bean counter/janitors don't quite get it. But yes piping in a suction shell along with repeat visits for cleanup oil/filter...
  48. Replies
    32
    Views
    1,499

    Ive never used I just know the Chemours guy said...

    Ive never used I just know the Chemours guy said it was for under 5 tons?
  49. Replies
    32
    Views
    1,499

    Never heard of it actually. I hear guys using...

    Never heard of it actually. I hear guys using that MO99 (forget R number) a lot in places they shouldn't as it came right from chemours rep that it was only for under 5 tons


    Sent from my iPhone...
  50. Replies
    32
    Views
    1,499

    Ok so that explains why I've only seen (on copes)...

    Ok so that explains why I've only seen (on copes) with the 3D's the solenoid is DE-energized to unload- unlike other copes that is.


    Sent from my iPhone using Tapatalk
Results 1 to 50 of 988
Page 1 of 20 1 2 3 4