Search:

I wonder how long the link will be made. I've done a few jobs with dissimilar linkage... I have warned customers to plan ahead

870593

Ivu cloud is version 9. And in it I don't have the simultaneous downloads.
Maybe it's in an upcoming update.

No tru-vu controller supports CCN except the PSM chiller manager. But thats the same as it was with the legacy controllers.
its always been the UPC and PSM were the only carrier controller on the...

You got me wondering so I just looked. Per the documentation its only version 5869951

before you give up, you should clip it. Do you have the clipping file for that?
Check the server. It should be on there. Then use app loader, clip it and try downloading.

with putty if you're getting gibberish a step wasnt followed.

open putty, set the com port and the speed to 115200

On the controller flip the switch and cycle power.

then connect with...

go here for the user guide.
you want document page 9 for the IP connection set controller to 192.168.168.1
...

Apploader works on any alc, carrier, oem product.
You need the usb adapter plugged onto the board or hard wired to the rnet port.
Control panel- device manager- comm port. what comm port is the...

When you say tabs. Are you referring to the areas within the tree on the left. If so thats a view you can arrange if you have an installer log in. An admin can make an installer level user.
This...

I really dislike PID loops when there are large changes in temp. Like a water loop or dat. I prefer to put a ramp inline after the Pid or controlling signal. When there are larger temp changes I...

I dont have the CID_xx

Good to know about the velocity. That I can test and see by controlling the damper by hand.
I have field loader but never used it. How do i get the software version to install it.

I do the same with starting fresh and setting the controller up as new. I'll check the version. Thanks

I have tried changing the point from 1 then back to 3. even flashed it and started fresh. Its verified not to be the wiring.
On the status page it shows off for fan command.

I'm finding a weird issue with these series fan power boxes.

Has anyone had an issue when the controller is configured for series fan, but the fan isn't enabled automatically. ( obviously in the...

I just tried an alc ZS2PL on a carrier vav controller. Worked the same as one with the carrier logo on it.

Ivu pro isn't much different then web control ( for the most part) I can run custom reports. For example I run a zone temp report twice a day at 9 am and 3 pm.
I can set up any custom report I...

The guys name is joe and he worked / works with alc / carrier. What company is that.

Old post I know. But I'm looking for someone to make the floor plans.
Who is still at it.

I would be doing what Balbie said.
I have gotten oem permission keys for doas units before. And the properties page was a train wreck.

Unless you have a bad overcooling issue due to no occupancy, I'd never set the minimum cfm to 0. You still need fresh air

The way that box is hunting you can either reduce the max cfm if it does...

the upc is really for chillers, condensers and rtu that have comfort link. You could make a program to work with vav's but it would be way to expensive to do so.

Balibe how would niagra pull in...

was the controller originally able to be accessed with backview. If there wasnt a backview program installed you wont be able to.

thats what I was thinking, thanks for confirming.

I am in the process of bidding a chiller for a customer. Previously I have installed a 30 hx and a 30 xw. The HX has a higher pitch noise then the XW.
I cant get a 19XR in the correct size so the...

you can have the software, but its useless with out the hardware. the key is in the hardware.

Great info. Thanks

let us know if what Balbie worked. If not I have it also with the program used to make the iso...

good find. I'll go look for a bulletin.

try setting those to auto generate. youre on a network number thats not carrier. Carrier is 16 ( could be 17) Try auto generate and see what you get.

You can use field assistant at a device and see all devices and the router. this tells me the comm wire is good.

I now remembered when I had this issue before. The polarity of the XT-RB was...

if i was in your shoes Id be putting in a case with the factory support.

did you try both ports? Port 2 is off by default. check baud rate on the ports also? When you did the set up of the router what did you change if anything? whats the rotary dial settings?

What is the mac address on the router rotary dials. DO any of the controllers have the same mac address. They cant with the newer drivers.
Being this isn't your first xtrb im guessing you did...

The only controller that has the modbus tab is the RTU open

You are looking in the wrong place. The switch is something used when the system cant communicate by bacnet. Like an old school time clock.

Its shows the bacnet schedule is on. Which comes from...

the UPC does not have any modbus points with any of the factory programs. Its all bacnet only. You have to edit the program for modbus communication.

When you want to write to a ccn block you will...

the newest file is usb22 i added it to the dropbox
https://www.dropbox.com/scl/fo/sqml6260rdh85gra6m8q5/h?rlkey=a8peei3jnufxwlj0e7xj9npar&dl=0

read the pdf. it tells you how.

go to the drop box link. everything you need is in there.

when u use an analog output to operate a relay I use a RIB Bapi has some good options also

better yet, For everyone its all in this dropbox

https://www.dropbox.com/scl/fo/sqml6260rdh85gra6m8q5/h?rlkey=a8peei3jnufxwlj0e7xj9npar&dl=0

what youre looking for is in the folder on your computer when you install the software. I tried emailing you the pdf with the instructions but it got kicked back. Email me and ill send it.

my carrier guy gave me permission to share this. https://www.dropbox.com/scl/fo/sqml6260rdh85gra6m8q5/h?rlkey=a8peei3jnufxwlj0e7xj9npar&dl=0

You need to set the address of the upc to match the units address On the properties page, status and element comm stat what ever the ccn address of the rtu is. enter that there.

I have done this. I uses a belimo motor with floating inputs. Then I used a position sensor which was also belimo that attached to the shaft / clamp worked perfectly

If you have an IVU server i would remove the touch screens.

ALL vav or vvt open controllers need a sat sensor connected, or a networked sat temp sensor. Look at the network tab( properties...

depending on how old the original rtu opn boards are, the newer programs have more features. So just downloading may not set them all.

Do you know what access rights you have now? All ivu come...

What board are you trying to reprogram. Some can be some cant.
Depending on the controller you may be able to access by IP. Is there a XT-RB or XT_LB on site also?
I have all the versions to...