As far as im concerned your the aficionado for staybrite8.
Type: Posts; User: Core_d
As far as im concerned your the aficionado for staybrite8.
Thats the beauty of brazing, by the time its hot enough its clean enough. There is no oil on a 900 degree pipe.
Sent from my iPhone using Tapatalk
RE Micheals is good around here as well, “they” have even given me a cheaper alternative than themselves on a double shaft motor. That’s respectable, especially after he did the leg work and got me...
Ive used a couple. Isn’t the ID smaller a typical pipe? For that reason I stay away.
Sent from my iPhone using Tapatalk
You can pull the membrane off of the concave side of the rib. That helps
Sent from my iPhone using Tapatalk
Seen this at a doctors office a while back and got a kick out of it..
https://images.platforum.cloud/uploads/20200527/54dd46e65d1bde4bf1e6c709dab3ae0a.png
Sent from my iPhone using Tapatalk
Beer is “carb”onated...[emoji23]
I think your referring to starch.
Starch is a carb, so is sugar, and so is cellulose that is found in green plants like asparagus....
Replacing grains with...
First amrad is king of the caps.
Secondly i carry 3’s
Sent from my iPhone using Tapatalk
Yep that was me lol
Sent from my iPhone using Tapatalk
I had a six pack of Negro Modelo last night. Seems I forgot that it wasn’t that good
Sent from my iPhone using Tapatalk
I prefer the sound the old one made. Other than that ide say the pro is an improvement over the original. Ive heard people say it is not as good at finding 410a but that has not been my experience....
I vote h10
Sent from my iPhone using Tapatalk
There is one dual fuel here in fl that im aware of.
It was installed as a accident im sure they had it hooked up just like a heat pump with aux heat. Its a good thing it had a high pressure...
I can sometimes go a day with only taking in about 1000 calories. I just kinda like going hungry. Natural weight is around 165-175.
I was loosly counting my calories and trying to come in at...
I got my body fat measured about 3 months ago. Im around %13.
Sent from my iPhone using Tapatalk
The power a meter puts out is dcv. Its possible a diode(s) would prevent that in one direction.
I agree about using volts. If i suspect a thermostat is misbehaving i always remove it and jump...
Sure as hell dont miss the traffic. I could kinda use a hair cut. Same old story more or less
Sent from my iPhone using Tapatalk
Well commission makes sense to me in alot of ways (with a base hourly pay). I do see the down side also.
If you think about every company owner is essentially working for commission. ...
Thats funny, ive used many and found them to be spot on.
Sent from my iPhone using Tapatalk
Not all txv’s are the same, some can handle a wide range of capacitys and some cannot. That would effect how they react. In any case the compressor will drive the suction pressure down and youll...
Better make it a 12er. Gotta stomp the beaten path...
Sent from my iPhone using Tapatalk
Why is bill gates crazy? He has been unsuccessful in all of his humanitarian attempts but. in his defense they are some pretty tall orders and its not like hes wasting tax money or anything. Clean...
Ive seen some bad bit I dont think ive seen one that bad.
Sent from my iPhone using Tapatalk
Scotlands whiskey is unfortunately superior to anything that the state south of Ohio has to offer. But, rightfully so... they’ve been at it couple years or more longer.
As bourbons go knob...
Why dont you put in a rheem rp20 with a 80%er?
it’s a variable speed unit that can heat down to 7°F in the few times that it can’t heat the home then you could use the gas furnace.
Hed also...
After, but it could cool it down equal to ambient temperature before the restriction. The freon will be hanging out for a long time and has plenty of time to transer its heat to the ambient air.
...
H10 nough said
Sent from my iPhone using Tapatalk
Ive found subcooling will stay pretty well the same. Its the head pressure and liquid line temp that go up. If you had high head pressure and high subcooling ide be looking for an overcharge or a...
Im not managing any numbers, im a worker bee.
But, ide charge a minimum of $1,200 for a coil swap.
If you run into unforeseen issues would that atleast be enough to cover it?
The ac...
Are you a lennox dealer? Lol
Sent from my iPhone using Tapatalk
Ive not had a notable issue with that, though it can happen. We offer a one year part, labor and refrigerant warranty to the customer in that case.
Its been my experience that the manufacturer...
The inficon i tried recently did good with the h10 reference bottle. Not near as good as the h10 though in practice.
Sent from my iPhone using Tapatalk
Infact ive gone as far as recommending replacment of a coil under warranty or otherwise if I see a rusted tube sheet, leak or no leak
If the customer goes for it, its a win for me because i...
Rust is definitely the cause as far as im concerned. This is why condensers leak 1/10 compaired to indoor coils and aluminum coils do leak but you can find the leak anywhere in the coil. Often in...
Really? Probably 90% of the leaks i see are just that. Especially on the bottom of the sheet where it sits in the pan.
Sent from my iPhone using Tapatalk
If thats the case why put up the extra on synthetic?
Sent from my iPhone using Tapatalk
Hate to rain on every ones parade but, given the condition of the evap coil there is a fair chance that it will start leaking before the “repair” you made will “pay for itsself” in the customers...
Does oil go bad in an engine? I recently seen a video about changing your oil even if it’s less than the stated miles based on time. Was not aware I had a shelflife.
Sent from my iPhone using...
I had a carrier Evap coil like that. 15 ton air handler four to five rows deep. First time I got there it was practically dry and put in three sticks of leak stop and charged it up. Anyway it didn’t...
Ide be surprised if the tube sheet does not leak. Calls like these can come back to bite you. And you may have stated no warranty but that doesn’t mean the customer is going to roll over if a...
Ive done this.
Sent from my iPhone using Tapatalk
How much bounce are we talking here?
Sent from my iPhone using Tapatalk
You could lay down some serious dough if you got all knipex hand tools. I had a catalog once, Looks like great stuff but I don’t know if I’ll ever have any.
Sent from my iPhone using Tapatalk
They are accurate enough, my question would be what would you achieve by having this gained accuracy?
Sent from my iPhone using Tapatalk
By the way im digging these Milwaukee channel lock. Button adjustment is easyier to use than the vise grip brand and they have a pipe reamer on the end of the handel.
The dewalts are terrible. ...
I still have em. They seem the equivalent of a klein in every way.....
Sent from my iPhone using Tapatalk
So did spoonplug ever get his part? Maybe he just hates cliffhangers...
Sent from my iPhone using Tapatalk
I like it moist but not fall apart tender...
Sent from my iPhone using Tapatalk
I was hoping reme halo sales would go up but not yet.
Sent from my iPhone using Tapatalk
Jmart does them here
Sent from my iPhone using Tapatalk