Search:

C a n
W e
G e t
A
M a k e and M o d e l

and loosing!

What your describing is a plugged / restricted check valve or X-Valve internal check A S S U M I N G the charge was weighed in!

Just a little factual information?

:whistle:

So the spider on the indoor coil in heat mode is warm but the unit is going out on LP Safety?

a plugged screen would do that. Refrigerant will still flow!

So why do you feel your being as you said Ripped Off?

Im confused. X-Valves, Cap Tubes

What do you have?

So the parts covered and apparently you don't like the extra charges. Shop around, ask other dealers.

Leaves you and me out :cheers:

Did you dump and weigh the oil in the pump?

Did you call Fulton?

There tech support is pretty good!

:whistle:

Dont like the price shop around!

One thing to learn here is Grow a Thick Skin. We ARE here to help, the problem is questions have been asked and answers have been vague. We can only base our answers on the information given and that...

It also states” jurisdiction having authority”
AKA local building department

Your making it too complicated.

Seeing as how the return air is a true reflection of what's in the home i say return.

Which one of the following best describes you?:
Homeowner (We welcome homeowners. Help us customize your experience)
Which of the following applications apply to you? (check all that apply):...

Refrigerant is not "USED". It only circulates inside the system. If it has to be added there IS a leak.

I asked questions and haven't gotten specific answers yet. I don't think anyone has!

Unless a line ruptured it cant be at ZERO!

Keep there # handy for the warranty call.

Being a Student get your post count up and apply for pro status.


A lot more information is available behind closed doors here!

Add this to your reading list

So you increased the capacity by 20 - 30% but the duct work and line set are undersized?

Start saving now for the replacement!

X-2

Excessive head pressure will allow the scroll to lift or pop up. It "Should" reset by itself but IT Happens

Condensate leak and the safety pan rusting.

Check out the NCI link. It WILL open your eyes

How do you know what your doing without

Manometer
Combustion Analyzer
? ? ?

Sign up at NCI and get some training!
https://www.nationalcomfortinstitute.com/index.cfm?

Sorry

Your in over your head

Call a professional

Electric is cheaper to install, that’s the only good point.
As the outside temperature drops your heat output falls also.
If your planing on a generator
Keep the gas.

What are the chances the scroll popped up and haven’t reset?

What does Standing Pressure Prove?

A 30# jug has the same standing pressure if full of 1# is in it!

OK

So lets get some Facts and Figures

Pressures
Temperatures
Voltage
Amperage

Sorry but

That accumulator would have to have 2-3 GALS of oil in it. The compressor holds a qt or 2!

Is there a senior tech that can help you?

NO

there the morons for not fixing it in the 1st place.

From here I'd look for a different contractor!

I’m sure freezing temps are mentioned in the IOM.
What material is the drain?

NYC for 30 years count.

Good luck. Sometimes even a blind squirrel finds a nut.

1099's

We all make mistakes, how it is dealt with is what matters.

Keep us posted.

That just means they make money not if they do the right thing. I know a lot of contractors that have been around 15, 20 30 years and do CRAP work! I made a lot of money repairing their screwup.

Wait a few months and the scrap guy will pay more!

Mini Split

Make sure that inverter gen has a Clean Sine wave or your computer is toast!

anything is possible but your description of the chain of events just doesn't add up. I wouldn't throw the tech under the bus quite yet, see how the owner deals with the issues.

Just have your service provider check it out.

You will need an onsite visit to determine the actual fresh air requirements for those appliances.

The drier alone says you cant seal the closet!

Pricing is not allowed.

I wouldn't have paid after the 1st mistake until I was sure it was fixed.

Get the service manager or owner on the phone and make them own up too there mistakes!

I would call them back and have them fix it.

I worked industrial
100% outside air
HEPA Filters in AND out

It can be done if you want to pay for it!