I think it was 3 pumps ago and im sure it was a jb pump the owners manual said you could use mobil 1 if vp oil was not available. dont really want to look for it though.
Type: Posts; User: Galt
I think it was 3 pumps ago and im sure it was a jb pump the owners manual said you could use mobil 1 if vp oil was not available. dont really want to look for it though.
find the switch sand the points and order a new switch.
Use to turn the suction service valve nearly closed to limit the suction pressure when starting with a warm box. when it gets close to freezing open it up.
Ever change a valve plate on a copelametic thats why you get so many different gaskets low temp bigger pistons.
Looks more like copper sulfate to me but dont ask me where the sulfur came from.
looks like the fork lifts are burning a lot of oil perhaps some tune ups are in order.
Yep unless its got a cord on it so you can unplug it.
I am
what happened to them?
Some ventors have that little restrictor plate for smaller furnaces
you need a kraut cutter.
My concern with scrolls is a limited oil supply. An oil sight glass would ease my mind on long piping runs.
you will be disappointed.
As long as it was fixing the ozone hole I would do nothing.
Anyone ever thought about what brand of ACR fittings they prefer? Mueller gets my vote.
put a manometer on it then make some pizzas and sit down and watch it it either drops or it dont
Room is 3600 cu ft
I was thinking 2 air change per min. would work.
No help?
A 30k btu and 2 20k btu condensing units are in a room. How do I figure out how much air needs to be replaced each minute to keep them happy? Plan to have a inlet open to outside first and if the...
Any major part cost more than a whole new one.
some time ago my bottles said extra dry on them.
how much oil is in it?
take the capacitor out and hook the wires together you will soon see the current limiting effect.
I think the one size up thing is for start capacitors.
On a motor that has both a start and run capacitor the purpose of the run capacitor is to limit the current that the start winding draws so it isn't damaged and can help smooth out the running torque...
boy do you get it.
The wood boiler is outside 100 feet from the house that it heats. Right now there is a coil in the plenum of an old lowboy oil furnace and an AC coil in the return there is no burner or for that...
wood boiler ac only
Didn't the coil just get done taking water out of the air?
What would be the disadvantage of putting the coil in the return low ceil in basement and have an outdoor woodstove.
it's a good thing
12 gauge
me too
anyone know what they put in the soap bubbles to keep it from freezing? methanol? propylene glycol?
ok thats what we will do
I have all the correct fittings including firestop and termination. I would like to insulate as close as possible because it is in the northwest corner of a house on a slab and we usually get at...
5 inch inside pipe i think 7.5 outside just kind of a better version of B vent for horizontal fireplace venting. question is can I put mineral wool right up to it or leave a gap?
If it's an open outdoor boiler then it don't matter it's going to rust everything.
Is it possible to have too big of ductwork? At some point will it have too low of pressure and reduce velocity. What are the effects on the new ECM motors.
teddy bear talks about the santa fe but uri has the aprilaire one so i thought it would be nice to hear some comments on them.
was wondering why there are few post on the aprilaire whole house dehumidifier.
the plastic is. the chart has 1/2 in. then right below it 1/2 T then 3/4in. then 1in then 1in T
The rest of the chart has no T's
same kind of table but for the plastic that cant exit the ground
I have a customer that wants to tie two 1000 gal gas tanks together they are 250 feet apart.
When I look at the tables in my rego service mans booklet for plastic underground they list 1/2 in. and...
One year at Oshkosh air show NASA had an electric tooth brush powered with a cap. ran like 6 seconds but charged instantly.
It doesn't hurt anything when it gets away.
use a thread file
Bought one new in 2012 100000 miles only trouble back up camera quit.
Navien put in a grand total of one. I think they and mini splits have a lot in common.