Search:

.

Never head an issue with staybrite. We used to use on low temp R22 discharge lines

Haven't bought R22, R12 or R502 for years.

Wholey buckets! I cant wait for what you have to share with us!

Do you want a good answer or a fast answer?

Last activity was 2009. He is likely retired by now....

I hear a constant whine 24hrs a day. I am 61.

I have done it once and it has worked for 15 years. Customer bought a condensing unit on ebay. I told him it was half the size he needed.

Called me a week later and he had a second unit...

Customer will find it, destroy the equipment and blame you.

My opinion is bad bad booze.

Anytime I see a chattered contactor it is most typically a pressure switch.

On the schematic, AT1 Ambient thermostat. Everyone I worked on used a 1069-101

Basically a remote condenser setup. First fan runs with either compressor, second fan runs based on ambient temp.

https://www.heatcraftrpd.com/contentAsset/raw-data/4f715808-5ccf-4d12-b904-cde92000b4d9/fileAsset?byInode=true

MAC unit manual

Refrigeration or AC?

I receive mailings all the time from the One Hour company

No practical way to do this. See above.

Turn freezer into a cooler, this is done frequently.

I moved my business insurance there also. Way easier to deal with.

Been there with the insurance company myself. They wanted new roof, new driveway, new storm doors and new side porch. A****** F*****.

I called and they told them they were mistaken.

They said...

Me:"I am here to fix your furnace"

Customer:"I think it might be like in the basement maybe?"

Filling with sand - I hadn't heard that in years. Where my dad worked, he said that was how they bent hydraulic lines. They were prototypes.

Been using 30lb automotive cylinders for years from Sams Club. Never had an issue.

In these parts we all refer to copper brazing as welding. Don't know how it got started.

No flywheels in F1. They use batteries.

In 1980 programming class I had to submit my programs on punch card. Received your results the next day. State university. Did the punch tape previous to that at community college.

We also had...

Opps...

Call Captive Air tech support. Be ready with the job number, it is normally on the schematic. They have excellent tech support.

Pull it out. It will work for quite a bit longer if the customer can deal with some larger cubes.

I have had machines with multiple bars removed.

Call Minus 40. We buy from them. I can provide contact information if needed.

.

I started my own company. Have worked there for 20 years.

Freezer needs an insulated floor, cooler panels or field constructed. Cooler may also if over a basement or on upper floor of structure.

If there are locks for floor panels, I am certain it had a...

You did nothing wrong.

My business is essential to me...

Add me to the list with same issue

1/2 half the width?
Some of my coils are 6' long.

Just joshing with ya.

Equal the height and they work and be can be easily cleaned.

Now granted, 90% of the coils I install are low profile.

I always distance off the wall the vertical exposed measurement of the fins on the back of the coil.

Coil facing the door when possible.

Mine is set at 62 at bedtime.

Voltage rating can always go higher on a capacitor, with no limit.

+1 on the bungee cord

I will be in Madison WI next week Wed and Thu for Trane training.

Anyone else going to be there?

At Copeland school 25 years (Gene maybe?) ago we were told crankcase had no effect below 50F.

Low refrigerant does not cause high suction pressure.

Yeah I lost a bid a job similar to that. The installing contractor did just what you showed.

We have one mechanical inspector here and we get along well.

When I saw what was done I called and...

Weren't they all built up?

I own a 2014 Silverado that the tranny went out on last week. One of several trucks I own.

$3900 back on the road. Chevy dealer condemned it, independent condemned it and replaced for $1000...

I have worked under a tarp draped over me and the unit in a pinch.

There is always someone that ruins it for everybody.

On the other hand, life's problems always got solved before the invention of the cell phone.

Prices on mani parts are crazy anymore.

:cheers: