Search:

Type: Posts; User: pecmsg

Page 1 of 20 1 2 3 4

Search: Search took 2.71 seconds; generated 19 minute(s) ago.

  1. If they deny it what are we talking a few...

    If they deny it what are we talking a few hundred.

    Iíll gamble!

    Belmont race track
    8th race
    Pick the winner!
  2. Fixed ThankYou

    Fixed
    ThankYou
  3. Calling tech support is a good thing. The other...

    Calling tech support is a good thing. The other options is Bsing you and screwing up.
  4. All manufactures are dealing with coil leaks....

    All manufactures are dealing with coil leaks. Thank your uncle for insane energy regulations.

    The name on the trucks are more important then the names on the boxís!
  5. What size? Any issues, hot cold rooms? RH...

    What size?
    Any issues, hot cold rooms?
    RH maintained?

    Any changers youíd like?
  6. Where is the installing contractor in all this?

    Where is the installing contractor in all this?
  7. You have to measure RH at the return air

    You have to measure RH at the return air
  8. You need accurate measurements before changing...

    You need accurate measurements before changing anything.
  9. How are you getting that reading?

    How are you getting that reading?
  10. When you get the new stat put fresh batts in the...

    When you get the new stat put fresh batts in the old one and check it in a week or 2.
  11. Never had a warranty claim denied because of dye....

    Never had a warranty claim denied because of dye. 90% of the time the parts arenít even checked!
  12. Replies
    14
    Views
    283

    and your customer had to pay for all that?

    and your customer had to pay for all that?
  13. Home warranty companies are a scam and worthless....

    Home warranty companies are a scam and worthless.
    Find a real service provider!
  14. Without taking static pressure readings I canít...

    Without taking static pressure readings I canít advise changing anything!
  15. Replies
    22
    Views
    328

    Unless someone in authority says so just leave it.

    Unless someone in authority says so just leave it.
  16. Funny Copeland allows spectronics

    Funny
    Copeland allows spectronics
  17. Replies
    45
    Views
    1,678

    You could see 100,000+ on inrush with the proper...

    You could see 100,000+ on inrush with the proper instruments.
    Iíve never heard exceeding LRA compressor is bad!
  18. Replies
    4
    Views
    298

    Some May 😁

    Some May 😁
  19. Replies
    2
    Views
    154

    I do t know anyone thatís not hiring!

    I do t know anyone thatís not hiring!
  20. Supply air will always be high RH.

    Supply air will always be high RH.
  21. I disagree There are times itís needed and...

    I disagree
    There are times itís needed and works fine.

    All it does is mix with the oil that circulates through the system making small leaks visible.
  22. Thread: Condensation

    by pecmsg
    Replies
    16
    Views
    541

    These people are full of it! I pick up leaks...

    These people are full of it!
    I pick up leaks that take 4 - 6 months with electronic.
    A little Dye goes a long way.
    How do the know how much Was added before adding more?

    There IS a leak. They...
  23. Replies
    12
    Views
    159

    A new humidifier!

    A new humidifier!
  24. Replies
    12
    Views
    159

    Drum type are outlawed here due to legionnaires...

    Drum type are outlawed here due to legionnaires disease.
    Replace the humidifier.
  25. Replies
    14
    Views
    204

    You can ask them. Refrigeration companies might...

    You can ask them.
    Refrigeration companies might need it.
  26. Thatís because you havenít gone to Boob Tube

    Thatís because you havenít gone to Boob Tube
  27. Probably because theyíre all guessing at what...

    Probably because theyíre all guessing at what actual size you need. The only way to truly know is to perform a manual ďJĒ load loss calculation.
  28. Why isn't the installing contractor working with...

    Why isn't the installing contractor working with you on this?

    The most stem and your concerned with how much energy is being used?
  29. Replies
    45
    Views
    1,678

    Higher amperage on Start Up? Thatís a new one...

    Higher amperage on Start Up?

    Thatís a new one on me!
  30. Parts are a industry issue not brand!

    Parts are a industry issue not brand!
  31. Thread: DIY AC Question

    by pecmsg
    Replies
    24
    Views
    461

    Even with my wholesale prices its cheaper to go...

    Even with my wholesale prices its cheaper to go to Home Cheapo or Blows!
  32. What top 3 brands? No manufactures deal...

    What top 3 brands?

    No manufactures deal directly with the end consumer, only with an installing contractor.
  33. Thread: DIY AC Question

    by pecmsg
    Replies
    24
    Views
    461

    This is not a DIY site. Why would you want to?

    This is not a DIY site.

    Why would you want to?
  34. A model # might help!

    A model # might help!
  35. Replies
    6
    Views
    249

    How did you know "Low on charge"?

    How did you know "Low on charge"?
  36. S T O P

    S T O P
  37. Replies
    11
    Views
    428

    Sounds like a poor install.

    Sounds like a poor install.
  38. Thread: Pump down

    by pecmsg
    Replies
    32
    Views
    674

    on line sale and day labor?

    on line sale and day labor?
  39. Replies
    4
    Views
    465

    Sentences and paragraphs would help!

    Sentences and paragraphs would help!
  40. Replies
    21
    Views
    16,315

    Not going to read all that but you have to...

    Not going to read all that but you have to measure RH with temperature for accuracy
  41. Just experience in general. Many parts are...

    Just experience in general. Many parts are proprietary and hard to get, now you'll have to get them from overseas!
  42. Order an extra unit so you have parts in stock!

    Order an extra unit so you have parts in stock!
  43. Replies
    14
    Views
    506

    Copeland also says to maintain between 20įf and...

    Copeland also says to maintain between 20įf and 40įf 6" from the shell of the compressor.

    On short line set freezers a heat exchanger may be needed to maintain above 20įF.
  44. Replies
    8
    Views
    439

    Plumbing leak got the duct work wet. Thatís an...

    Plumbing leak got the duct work wet.
    Thatís an insurance claim.
  45. I already explained that. Keep looking.

    I already explained that.
    Keep looking.
  46. Pressures without temperatures are worthless like...

    Pressures without temperatures are worthless like the tech. Find a different contractor!
  47. Replies
    27
    Views
    886

    Your going to tell the tech? Best to be...

    Your going to tell the tech?

    Best to be extremely diplomatic about it!
  48. Thread: Pump down

    by pecmsg
    Replies
    32
    Views
    674

    Whatís wrong with refrigerant? Itís already in...

    Whatís wrong with refrigerant?

    Itís already in your house!
  49. Were the replacement motors rated for speed drive...

    Were the replacement motors rated for speed drive use?
  50. Thread: Pump down

    by pecmsg
    Replies
    32
    Views
    674

    If the condensing unit can handle the full charge...

    If the condensing unit can handle the full charge thatís fine. Most canít handle it so the rest gets recovered.
Results 1 to 50 of 967
Page 1 of 20 1 2 3 4