Search:

who - your oncologist

why - prolonged exposure often result in cancers of various types

could be an exchanger problem but that would be effectively bypassed when the pressure switches are. get your manometer on the valve/manifold. a drop in gas pressure could do that. debris in the...

the heat pump moves heat from a warm area to cold. in this case - from your basement to the water (even when the water is hotter than ambient air).

your basement will be VERY cold (maybe very...

"It was working fine before you touched it!"

Supco stuff scares me. Kind of like the twitch I get when driving next to Swift semi-trucks.

I didnt "report" it via the triangle. I made a reply to rundawg on what happened to me when he questioned my post (see post #3 and I deleted my post #2). That was my "report" in this thread. ...

Fair enough. I can only report what happened when I posted.

It'll be fine.

Do be away, a heat pump water heater will remove the heat from your basement. The furnace will have to make up for that loss. You will be no further ahead in your monies saved.

It's not different from my tastes, in many ways. If it's supposed to be a news thread only, then commenting should be turned off except for the OP.

No, but the content lies here. As do most of the people already commenting on it. Additionally, a duplicate thread of cy's posts isnt needed.

Freedom of the press is fine. I approve in fact. My complaint, like always, and this post is a good example; that good discussion is buried under tens of tons of pages of memes. (This one is 10...

I have many good friends that are on the opposite sides of the political spectrum. I'd like to think that I can have a cogent and intelligent discussion with them without calling names. It's just...

you're correct. I never opened this post until now. When I posted it was on the "chirp thread" and after I posted it was immediately closed. must be some forum glitch.

edit- (I couldnt figure...

Well the Weil-McLain GV series has been very durable. The inducers last decades. The 90+ will get you condensing with a cast iron exchanger and PVC venting.
...

.

.

He's wrong. They fail in short term due to not being designed for the application.

Yes, Im active in this forum. I contribute in many sub-forums. It's a "giving back" thing, free/charity kind...

OP has 220 posts?

sorry to hear. but next time, or if you find another proper replacement online (ebay, for example), try to find a good reputable motor rebuilder in your area. They're a lifesaver a lot of times. ...

It can be. I had a gas fireplace for deck use that had the same problem. Increasing the size of the gas line and boring out the orifice to a cone shape resolved the problem. It was an issue where...

135k? That's monstrous. Did any one of those determine you actually needed that amount with a Manual J?

Buy it and never look back

it's that double post that brought this on, right? :D

I agree with that. Or the thought that others could maybe see us as they see themselves.

Like I said, only that calculation can tell you what you need at the given design temperature. You'll be able to dial it in easily with that.

Have a good night.

will his plan hurt the equipment or the drain? No? Do it his way! Yes? Get it in writing that nothing about the install is your fault.

Problem solved.

If undersized, you'll lose a lot more than that. 20,000 btus is a lot of energy.

what were the past years' temperatures on average?

For example, my "area" usually uses 10 or 0 degrees. My area for the last few years has had long stretches of -10 to -20. I try to size the...

with that many 240 volt breakers, plus all the gas appliances, it leads me to believe you do have heat strips and they are ON. Due to site rules we can only tell you to call a qualified tech to...

In regards to the thread that everyone helped me out with back in 2013 that Admin won't reopen -

https://hvac-talk.com/vbb/showthread.php?1281691-Aquarium-Chiller-Questions

I'd like to report...

Do you have an electric hot water tank? Dryer? Stove?

Lennox and others make a 98% unit. If the run times are while at night you are only slightly oversized. Also, if the localized temperature averages over the past few years reflect these -10, -20,...

The next owner doesnt matter. They can change it how they see fit.

That said, your questions and mine should be answered.

it wouldnt be so bad if it was wired right, a callback very soon. the tee in the wrong position..that's just horrible

what efficiency is the 60k? what is "well below" zero degrees?

Dont feel bad! (You havent been banned...what, 3 times or so, for telling people bad news!) It's ok! People make mistakes. Everything can be fixed.

Any equipment that is installed wrong will...

"Accessory heater model" would be the heat strips. How many giant rated 2 pole breakers do you have installed?

I have a picture someplace of a concrete floor where only AC condensate was put across it for 6" or so to a floor drain. It ate a notch into the floor. Imagine what an acid would do, or to the...

They may be amusing but they're based on actual real world experience. Pecmsg more so than mine. He's a smart cranky old fart.

I'd put a 1" or 1.5" pipe under the slab going to the pump/sump/crock or out to the exterior drain tiles if you dont have that. It's very common here (Buffalo,NY) to put the waste under a slab. ...

But but but... it's a NEST! It's energy saving, easy to use, and looks pretty....and and and a selling point!!


:rolleyes:

Im sure you used the PROPER equipment, too. It's not just the CL that's going to kill that thing. It's in an environment, condensing humidity, that it's not built for.

Anyone who comes here and...

He was told on page 2 to not use equipment not designed for pools... and here we are... in an ozoned pool where the ozone generator doesnt work and it's now all chlorine.

if you cant get under the bay window the only way to get to it is through the floor.

shoulda had the old motor rebuilt at a motor shop.

Damn "Youts" today... :rolleyes:

there's no fix for the floor other than take it out. you could use an overhead heater such as a hotdawg, yes, but they are far from efficient. you could use the same style of heater but off the...

yes, rotten eggs smell, whatever the chemical type (there's lots) prefers affinity with air.

shocking the well is fine... but you also need to shock the system after the charcoal filter, too, to...

works for me

I think carrier makes a side discharge unit. but i dont know how big it goes

edit - they do make a 5 ton, but it's only 14 seer

https://www.carrierenterprise.com/24aha460a003-1426278595300

the idea is good, but can they be trusted with an implement of destruction?