Search:

I know this is an old thread but the info so far was mostly wrong and bad. Hopefully this correct info will help someone else.

You have to increase the indoor cfm to increase total cooling btus...

The new fieldpiece heated diode leak detector uses the same sensor as the slr8. Seen it in the specs online. But it may be more sensitive due to software? The detector going off when you walk in...

You can actually link all the redlink 8000 stats to the wireless adapter hooked up to zone panel. You lose the ability to add redlink accessories directly to the stats as the menu disappears from the...

Would you be interested in selling some of those Cooper pipe clamp probes?

Learn your tools. The slr8 is bad on r22 but very sensitive for 410a

Select is horrible. H10pro is great for 22 and ok for 410a.
Slr8 is great for 410a and horrible on 22.
The select barely picks up anything compared to those 2

Yes. Several years in a row other techs were adding 1 lb and they didn't find the leak.
I show up. Cycled system off. Don't hook up gauges yet since I know it has a leak. Check the service valve...

I find less than 1 lb per year leaks all the time. The h10pro finds the less than 1lb per year leaks on r22 no problem of you get good with it and learn how to use it to its full potential . It's...

I got 4.5 years on my backpack veto bag before the zipper started having issues. Stitching was fine. They sent me a new bag as a loaner. Then I shipped mine back then they told me to keep the brand...

You need a mini split

I don't need the targets. But is very nice to be able to show customers when everything is off target and show after repairs that they are correct. Most of my customers Realy like how i can visually...

An update and opinion for you Jim. Had a ac start up yesterday with 71db return air temp and 72rh. The suction pressure was elevated a little over standard design temperature difference so the target...

Coremax is already a high flow port. No need to pull. And can't pull and pull vacuum anyways.

You can also buy the extension that Bacharach make specifically for the h10pro. I have it and it helps alot with getting the tip into hard to reach places.

I wish in measurequick could always see pressures, saturation temp, superheat and subcooling at top of screen while scrolling through all the different readings.

When will you be updating the app?

So I have been using the app now for a few weeks and almost every job it is raising the target suction pressure and target head pressure but my actual pressures are consistently where the normal dtd...

I have the cps one. Works great. With 2 recovery machines hooked to same unit. One g5 twin using the transformator, 1 without. The machine with it pulled out about 35lbs while the other machine...

Actually my imanifold is manufactured January 2019 and still has low power radio in it. I thought I would get the higher powered zigbee radio in it but nope. Kinda disappointing. And the 2 air probes...

So the return temps are changing the head pressure targets? I thought only outdoor temp affects head pressure target?
I un installed the app and reinstalled a few times and it quit doing that now. ...

OK. I figured it out when it happens. I am using iconnect and pressure imanifold probes and imanifold temp probes. Head pressure target is correct only if return temp probe is not synced. As soon as...

Measurequick keeps setting my target head pressure wrong. If I set it to 10 seer equipment (25° over ambient) and outdoor is 70 manualy enterered or using probe it keeps setting target head pressure...

I have an iconnect (short range radio),
an imanifold- manufactured in 2018 but still short range radio😢, 2 low pressure short range pressure probes, 2 high pressure short range pressure proves, 4...

I can say bill and north park are very good at supporting there customers and taking care of issues with the tools. Now just come out with wireless temp clamps please........

The slr8 is one of the most sensitive detectors available for 410a(works great for me on manual zero mode) . The dtek select is horrible for anything
The dtec tekmate is great on 22 but completely...

The slr8 is one of the most sensitive detectors available for 410a(works great for me on manual zero mode) . The dtek select is horrible for anything

I've changed out about 10 wall mounted evaporators, 2 ducted evaporators and 1 ceiling cassette evaporator . Fujitsu had some leaks and changed the way they are making there coils.

Cant do multiple compresors in measurequick. I work on and service alot of 2 stage rtu units. And can't use repeater probes I don't think with measure quick? And can't see or change mappings of...

Still no wireless temp clamps😢

I would like to see temp split available as an option in the trending list please. Also could realy use higher refresh rate for the wireless pressure probes. They are unusable to see where fan...

I go back and forth between the new imanifold app and the clearesult version wich is realy just the old app

You can download imanifold clearesult in the app stores. It's basicly the original version on 1.something before 2.0 came out and screwed up everything.

Thank you. Will be much easier to enter the function settings

Apparently no one knows

I noticed today while checking a air source heat pump in heating mode and no strap hooked up for suction line temp the app still shows a superheat reading. I verified nothing set for suction line...

I would like to see temp split in the trending options like the old app. Please and thank you. It's nice that the trending has options again.

It does automatically select a profile. I think when you turn on the app is should not automatically select a profile. Should have to select if you want one. But even if I want a profile it still...

The app shows target suction pressure and target head pressure with no air temperatures inputted or probes linked up. How can there be a target pressure with no data for the target? Under...

I agree about the pre entered numbers. In landscape mode the Guage is partialy off the screen. It doesn't fit the screen. I have an android. Have to scroll up and down.
Any way to create a profile...

Thank you for the power down all probes and imanifold all at once. It is mostly working. Sometimes most probes turn off. Most of the time all probes turn off. And once in awhile no probes turn off....

Thank you for listening to our feedback. I will update and check out the features. Thanks

Something else I would like to see.
1/
i would prefer the App to automatically try to connect to imanifold on opening the app, or an option to toggle that on or off since I would think most...

2/ Trending. I would think anything that can be measured should be able to be trended, like superheat, subcooling, temps, pressures, etc. I also used trending to watch walk in coolers and freezers...

I am on Android

So 4 things so far that I don't like or i aint doing right? I downloaded app on my extra phone in case I didn't like the new version and could go back.

1st problem. If I power on more than 2...

What happens if you don't have a data connection when it tries to log in?

I was wondering if anyone knew the code to access the installer menu in the fujitsu fglair app? I have a login for the fujitsu General portal but trying to see what's in the installer menu of the...

Yes they are. I'm picking up one of them in Monday to ship to someone then could pick up another one.

The description is on the post. 4 brand new ak900 Guages with manifolds. Brand new in the package still. I only have an android and it won't let me post pictures. So it also says in the post I can...

Us