Search:

I think there is a way to check the default path for plugin in izot CT.
I have had issues when databases have been copied to newer computers where the original DB is looking at the C/Lonworks/Import...

Thanks kl!

Anyone have any recommendations for online training?

I know that's a broad question but reading through the VPN thread I'm realizing how little I know.

Thanks

The LIP's are routers so you you won't poll data from them. The LINX 101's are webservers and typically datapoints are exposed as OPC to be viewed in the graphical project. Shoot me an email (in my...

You need the Loytec Linx Configurator. You can download from the Loytec Website. Top of the page "Support/Downloads/Software"

You will also need the admin passwords for the device(s)

You could look at the Circon SCC-520 or Loytec LIOB-585.

I'd love a copy!
Thanks,
Email in profile.

You will need to bring whatever points you want to use into the linx servers first (scan Network, pick points, format, download configuration, etc...). After that I believe you enable the opc da...

Make sure the points in question have a default value set and or are marked persistent.

Did a job recently with about 15 VCCx2 RTU and i had intermitent com problems until I landed the shield at each device. I also used 34800 buad.

These units have an android tablet talking to a Hotspot plugged into the ethernet port.
Can I change the IP address from the tablet? One of the user guides I found online says I need the Sedona...

I am servicing a site that has several SCU units with OEM installed EASYIO FG32 controllers tied into the mstp bus with a numbered of Distech ECB VAV. I’ve got an existing IP bus that runs throughout...

Maybe some carbon filtration would also help?

http://www.circon.com/products-services/featured-solution/

You should check out Circon.
They have some new Low IO count Bacnet IP controllers and I don't think they will charge for the programming software. SCC 520 I think.
Graphical programming like gfx.

Nice!!

thanks

Finally making the plunge into Niagara.

using FX workbench 4.4 and I'd like to see if there is a way to prevent individual set points (Heating and cooling) from being improperly written too on the...

Can you give more details? Are you bringing in modbus points to the LVIS to use on the LVIS only or are you trying to use it as a gateway to the jace?

I think you can get a demo version of OpenLNSCT for free which will run one database with 5 devices.
Create a network, add ECC-VAV and commission (Upload settings when you commission)
You will need...

Any help is greatly appreciated.

I am wanting to calculate approximate data usage for trending in a Distech EC-Bos-8.

I know what points I want to trend and the frequency and therefor the...

Can you swap the card out with one of the analog control cards? Tstat, transducer and actuator look like they'd plug right in.

I think I just lied to you.
The connection report for a whole site only seems to work from the connections tab within the Circon tool and the only report that is available when run in lonmaker is...

Circon has a LNS Report Generator plug-in and you can do lots of different reports (Channels, subsystems, connections, etc...)
I think it's only available with their LNS tool but they may give you a...

fyi
https://www.adestotech.com/news-detail/adesto-announces-agreement-to-acquire-echelon/

Not sure if this helps but I found it in the LCI card pdf. pg 89

https://www.lonmark.org/product/datasheets/Trane-BAS-SVP02A-EN.pdf

. The bypass timer is set to the value in nciBypassTime every...

What about a Loytec LINX server?
Has the modbus interface, RTU or IP. has the email server, web ui, and some have SD slot and or USB for external storage if the internal storage isn't enough (4...

I have used a leviton dimmer pack in the past....

Ditto on Circon Network Integrator, Lonmaker is still available but It's called Open LNS CT (Commissioning Tool) and its sold through Digkey. You will also need visio if you go that route. No Visio...

I think they were using some generic modbus IO for expansion at AHR, even had a modbus touch screen for local control.

The controllers seem very nice, a couple of different flavors, One is Lon and or BACnet IP.
The modbus port is a nice add, land a modbus device or two and create the associated modbus register and...

Not sure if this is the case but I recently heard you don't discover Distech BACnet points but they must be created. Not sure of the process because I only recently got my first tour of Distech Jace,

You should look at Loytec LDALI

Everything on the DALI bus is available on either BACnet or Lon.

Suck in all the points on the LDALI over BACnet IP into NIagara.

I've done a good size LON...

Are you looking for a specific product?
Is EliteDALI a Niagara only solution or can their products be used on any DALI network?

You might reach out to these guys?

https://www.optigo.net/

Looks like my pro membership got kicked back to general membership. should I follow up in different thread?
Thanks

Thank you all for the input.
I will pass it along.

I guess I really meant configuration ability.

I'm kind of assuming a Tracer SC upgrade may be a bit more money than going the Niagara route but by how much?
I kind of figured that the...

I understand that but when you have a building that is all Trane Equipment your married anyway.

There is no plan on doing anything with the field devices as everything appears to be in good shape.

Gotta client that is contemplating a Tracer Summit upgrade supposedly because the BCU's are no longer going to be available/supported.

Pretty standard set up, 5 story building, 10 self contained...

No re-occurring licensing and free software?

Ditto on Loytec

They have a full selection of products and have done a real good job of standardizing the configuration tools for all the products.
It's so nice to be able to download the tools...

franklin2
Please contact me,
I'd love to discuss this with you.
With just a bit more information I can put something together for your consideration.
And no Java.
My email is in my profile.
...

I think you need to be a little more specific.

one building or multiple buildings?
up to 50k sqft
50 to 250k sqft
over 250k sqft

and as better duck eluded too, I'm guessing analytics only...

Where are you located?

Yes and yes

There is a difference between a LIOB controller and a LIOB module, the LIOB controller is a fully programmable device that is programmed by a separate programming tool that is run from within the...

What do you mean by "Switch them on"? I'm assuming you mean control an output, schedule, etc....
Do you think that it only reads but not writes?

The programming tool is for the LIOB controllers and the larger automation servers. You get multiple licenses when you buy the device. You can purchase it separately but its not not that much....

I've seen to many people bash the LVIS because it doesn't have an "Easy" button. It's like anything else out there, you gotta put in some time.

It would actually be a perfect solution for this...

Ditto
Or if you can't drag connect directly to jace then use a laptop with LNS tool and U10 stick.

You should be able to get a trial of OpenLNS CT or Lonwatcher which will let you create a...