Search:

See "note..."

http://www.naima.org/publications/AH116.PDF

I've had the Klein one for several years and have had no issues.

A. Beginning July 1, 1995, no individual shall engage in, or offer to engage in, work as a tradesman as defined in § 54.1-1128 unless he has been licensed under the provisions of this article....

Effective area.

It's a measurement that can only be recorded in a lab because it takes into account as air passes through the openings on the grill it's compressed and that slows airflow. The...

I went back and moved some tools around in the bag and ran the zipper back and forth and it worked the kink looking parts out. All is good.

Yeah, but those were user error as I went through all the different combos of where to put things. It's pretty much loaded like it is. A few more hand tools could fit in there.

About 40 lbs fully loaded. The part I liked about it is it frees up my hands to grab more stuff for long walks. I don't go up ladders much but I would imagine it would be difficult to get up a caged...

Hope you like...

http://www.flir.com/instruments/content/?id=66732

The size of the blower outlet is smaller than the opening on top of the furnace. The blower outlet is something like 12x12 but the opening on the top of the furnace is about 12x16.

Using the 12x12...

Did you try logging out? You have to delete the cookies from the site.

Log out on the top right of your browser and log back in.

The connector going into the back of the sensor doesn't snap in very well and connect tightly. It's unfortunate because I like it overall but this is a flaw with the design of this particular micron...

Testo 417

With Goodman you don't have to question. You can pull up the spec sheet from their dealer website and use the chart. The chart would have told you for a 1.5 ton GSZ moving 600 CFM at 70F OD and 70F...

Except capitalism is a property theory and a free market can exist in any of the property theories including socialism or communism.

The freedom to enter into business with another party (or more) with clean hands. Free market was never intended to me a free-for-all. It's really that simple.

Why don't you go surf the compressor manufacturer's website and get compressor performance data that way. Copeland has an app call "X-Ref" that you type in the compressor model number and it will...

About a bill less than the 550 without temp probes and about 2 bills for the 550 with dual pipe clamps.

You can zero them out before attaching to the system and during peak test you can use temperature and time to make sure your systems are leak free when you're done with them saving you the trouble of...

How accurate do you like to be? Do you like being like those "other" guys or do you like knowing that you put a system exactly where you wanted it? There's nothing accurate about 3-2-3 combined with...

Trutech Tools has a video explaining why digitalis are better than analogs which you can find here about the third row down:

http://www.trutechtools.com/Air-Conditioning-Videos_c_1154.html

Sure they do. Inspectors don't particularly care though if it works, so long as it meets the code (they can remember).

Klein still has a sale going on with the narrow clamp meter. It's $17 and works great. I bought two. My main is a Fluke 117 and these are my backups. I still have my Fieldpiece LT-17 that's like 15...

Oh come on now. It takes 45 to 60 minutes with the right tools to remove, replace entire motor and reinstall. It takes two hours if you clean the entire unit of the drywall and paint dust covering it...

Take the screws out of the sides holding the coil in and pull the coil down to allow enough room to remove the blower assembly. Obviously you'll have to remove the other panels. I've had to cut the...

Sounds like a problem with the absolute limited information provided. Maybe undercharged, maybe restricted refrigerant circuit.

A decent tech can finger it all out for you.

Merry Christmas Everyone! Hope you enjoy your family and friends time and my best wishes to all of you!

It's one thing to use a pass through vent. It's something else to place an object that's much larger than the grille directly in front of it and expect the air to not come from the closet door and...

Why not just rotate it 90 degrees and install it the way it was meant to be.... I have a feeling someone was... :couch:

It was actually designed like this.... along with 30 other units....

Yeah that's an outside closet... :anyone:

I was just there for vacation. Nice place. I guess you're looking for jobs?

http://resourcecenter.pnl.gov/cocoon/morf/ResourceCenter/article/1468

They don't report R and U values for no reason. Fenestration is not some random number thought up to sound cool. They're only a waste of time to people who want to sell the biggest system possible to...

http://www.grainger.com/images/products/enlarged/XL-5LL46.JPG

That's my favorite multi-tool. I still keep long 1/4 and 5/16" magnetic nut drivers. Every other tool has a specific purpose except...

http://www.grainger.com/Grainger/items/5LL46#moreOs

Any combination of 35 cubic feet.

1 cubic foot of water is 7.48 gallons. 1 gallon is 8.33 lbs...

http://www.engineeringtoolbox.com/water-density-specific-weight-d_595.html...

You don't go into business to make friends. I think that can be made into a reciprocal.

Maybe Larry and Darrel but my other brother Darrel, now that's a different story. I'll help a friend resolve...

http://www.natex.org/HVAC_HVACR/cert_hvac_findtraining.asp
http://www.natex.org/HVAC_HVACR/cert_hvac_online_education.html
http://www.acca.org/store/category.php?cid=37...

15.5" x 22" is the outside dimensions of the unit... I think it's a 14" x 20" or at the minimum 14" x 18".

Is it not in the air handler/furnace? Is the a section they made in the duct for it? Is there an air filter in your return grilles?

You don't keep the pump closed off while not in use? If the oil is absorbing the moisture at least it's not happening to the metal inside the pump...

I don't think that's all entirely true for all of them. I agree the higher priced ones do though...

http://www.hvacr-tools.com/yellowjacketac-vac.pdf

Use the largest surface area possible for your air filters... If that means having all three filters instead of the one in the air handler do it. The air filter is a restriction. Also if you're using...

Electric and fuel rates?

Read over your instillation, warranty and owners manuals well. Many times if you need to and enjoy...

There is never time to do it right but always time to do it twice.

Yeah, if you use it and it doesn't work it can gum up the entire system. Only two things should be in the refrigerant circuit, oil and refrigerant.

http://www.fsec.ucf.edu/en/publications/pdf/FSEC-PF-443-08.pdf

I don't think anyone is ticked off, at least I'm not. This is common and sometimes required to learn something... as long as it stays...

https://www.acca.org/Files/?id=121