Search:

Yep.

Baldy, I got the impression that the OP was referring to line sets in the 75 to ioo foot range. No tonnage was mentioned.

I learned a long time ago in an ICP class that when talking about...

How about turning vanes?

Google:Jim Bergmann. He has several easy to understand hands on videos. You'll learn a lot very quickly.

Yes, or to put it another way:Measure between the bottom of the evap and the top of the...

So your saying it jot up to +400*F in the attic to melt the soft solder?
Seems to me that a fire would start at right around that temp.

http://imageshack.com/a/img826/9227/wglo.jpgUploaded with ImageShack.com

RAISE the can 24" ? Not sure what you mean.This is a side entry return and over head trunk.

Sounds like you are talking about a horizontal install. Can you clearly please?

are you the home owner?

Yes...

.6 is the total system static.
80kbtu 96% mod furnace with VS blower.

3 ton 16 SEER ac.

temp rise is in spec on low and high end of firing spectrum.

What he said...maybe even an accumulator.
Make sur TXV is adjustable type ... I have had factory service reps tell me to use non-adjustable type and could never get SC and SH right.

THANK You.

have to use infrared detector. Regular hot diode sensor could cause a fire.
R600a is butane....just like in a cig lighter.

No blockage. Checked trunk and drop..both are clear.

!@#$%%....what the heck?

Nope. No nieces or nephews.

I am dealing wit a 25x20x4 media filter that shows dust build up only on the rear half of the filter surface. Are turning vanes the remedy for this?

The RA drop is 10x24 and the boot is square...

A 410A cert class would set you straight. You can get them on line for free.

This is off topic just a bit but worth mentioning.I am just wondering if anybody has a problem returning parts to the selling supplier?

I have had problems with warranty returns on install only...

Thank you sir.

Contact info ?

I marked my SMAN clamps too before I quit using them. Don't see a need for diff size clamps though.

neither would I.
Was trying to show how misused bad rules of thumb get and charging an ac was the best example I can think of . There are guys who charge to 30* over ambient on high seer equipment....

Take it from a guy who has done domestic friges, you don't need anything fancier than the Tek-Mate.

Suspect an evap leak? Throw the tek mate in the freezer and turn off the frig. As the pressures ...

If they have purchased a labor warranty thru the mfgr then it usually has to be serviced by an "authorized dealer" and they pay peanuts.

Nope. They supply prts warranty and the installing contractor supplies the labor.

Nope. They supply prts warranty and the instlling contractor supplies the labor.

That is an old system and a PIA to work on. There was a conversion kit issued a few years after the that model was released but i don't know if it's still available and it's expensive.

The way I see is the HO would not be calling your company in the first place if they were happy with the first guy.

I would try like hell to gain the HOs trust to gain a new customer.

Dude! I told you to use a MINE DETECTOR!

He BIT it off lolololol just kidin Guy

Hey Joyed, I have a question I hope you can field for me: I was cleaning my BluVac with Iso-alcohol but I may have but over did it.

The alcohol got into the space between the protective display...

So, My Gorillia Mia is not down wit' da' Blu Vac?

I don't agree. Tec-mate turned out to be ok for me. I could not find a leak to save my soul on a 16 SEER 410A condenser that was flat on refer on arrival. My H10 did not make a peep.

Went to...

And my intent was meant to say: There are many varied opinion on what the condenser discharge temp over ambient should be. I have heard values of 10*F to 35*F over ambient that were big used by...

That's true but the OP was asking about using 30* above ambient as a way to as a determination of proper system operation of a tuned system For trouble shooting the temp rise off the condenser is a...

You make a good point. One of the things I had to learn was you must know the accuracy of the meter your using.

I trust my 570 because it is accurate to 1/2*f. Was thinking about the YJ Analyzer...

My Gorilla mia, I never mentioned a yj recovery machine.

Dont you remember from way back that 1/4 hose gaskets were all that was used in schrader caps.

EXPERIENCE AND GOOD TRAINING ARE HOW I LEARNED. sorry ..cap stuck for a sec.

SC is listed on unit name plate. Super heat can be be obtained reasonably successfully using a refrig charging card.

seriously..RX5410EX PROMAX.

The one with the purge button:grin2::grin2::grin2::cheers:

everybody had a problem with the 552 when they first came out. That's why TTT stop selling them until the problem was resolved.

no software. Just stuff I mentioned Plus the 552 slave cable that the 570 to read the micron level thru the 552.

I carry o-rings for the plastic caps if an HO won't buy a new brass caps

I collect old brass ones with no gaskets.

I use 1/4" hose gaskets to replace the missing gaskets in brass caps.

I...

Not really a good rule of thumb to follow. Too many variables that can temporarily affect it.

Better to stick to the factory specs of SC and SH.

Anybody I talked to said Testo paid the postage to and from NJ.

Just curious... how long did you have to wait?

You guys are talking about the new Scrade 21s made in China...mine is an older model made in the USA.

Fixed bulb?...really.

LOL...how does the purchase of a few more fieldpiece instruments make the SMAN 4 micron gauge easier to understand?

lovin my new refurbished Promax r 410 recovery system.

might think about changing your script then. Seems you got a little bit of pain killer rage going.