So I'm kinda screwed then if it's comparing themes with some certificate then dang.
Type: Posts; User: Nembus
So I'm kinda screwed then if it's comparing themes with some certificate then dang.
I don't even have a station running though. I do all this and try and to see if the module shows up under my modules on my host and it doesn't. It's a modified theme module as well and don't see it...
It's a code signing certificate, going off of the steps outlined on Niagaras doc linked higher up in the thread and it is imported to the user trust store.
No bueno, mine was set to medium as well and I changed it to low. Still nothing. Do I need to repeat the certificate creation/Import/Jar signing process again while my verification mode is set to...
Yeah I had followed these steps, I created my own certificate, imported it, signed my modified jar file with it and put the signed jar file into my modules folder and open up workbench. Still not...
I've modified a jar file and I tried signing it with a custom certificate but either it didn't work or the certificate wasn't valid for my workbench/license. I was wondering what the process was to...
I did a job recently with about 20 of them and I never had any issues with them. I would bench connect them one by one, upgrade firmware, properly set the IP, reboot and download your IRM program.
Spyder classics or Spyder 5/7s? We have issues downloading to Spyder 5/7s connected to a JACE or Eagle, takes forever for one download.
Feel free to PM or email me any questions you have, I have experience with Delta Controls and Honeywell WEBs line. I'm not a BAS guru by any means but I try to answer questions I know the answer to...
Just added my email to my profile. Thanks, appreciate it. Would like to take a look at any resources you got, I've got a bunch of documents that I saved up that I plan on reading through when I get...
You mean the Optimizer lol, I really like CIPer 30s as well, solid controller just expensive is all.
So I've been using Greystone for roughly 5 years across 2 different companies and honestly I don't think I've had a DOA sensor ever. The basic resistive temp sensors will drift out of the accurate...
Yeah agree with the other two posters, you can see what the controller reads then measure the resistance and calculate what it's actually supposed to be.
No I believe its called load from database
You need to view it while it's loaded on a controller which you can do that through with either enteliWEB or ORCAview. All the .pg files will be available to be viewed. You will still need to...
No navigator doesn't support firmware updating whether its downgrading or upgrading. You can use flash loader to down and up grade firmware and you can use system loader to do mass firmware update.
Looking to get approximate pricing for popular Delta controllers like a DAC1180, DSC1180E, eBMNGR, eBCON, DAC633, DAC606, etc. If anyone can post or PM prices that would great.
Thanks
Thanks, it worked
I like the lead/lag block but I hate that there's no auto reset on pump failure, anyone know any work arounds to get an auto fail reset instead of manual?
If the rooms are on setpoint then it works :)
So with my stubbornness I got it working, changed out a TR42 with a TR40 and I'm at 102% power usage, something like 277% memory and 103% bandwidth. I'm only pulling temp and setpoint. It's not as...
I haven’t really tested it, I saw the zone temperatures updating. It probably lags or bugs out probably. I’m using a CIPer 30.
Trying to figure out the best solution for this problem, I have 7 TR42's and need to add one more but I'm not able to because of the power consumption limit that exists. It seems like the WEBs...
Email their tech support, they're quicker then asking the controls forum here.
Screw terminal seems best imo, the push locks works as well when done right but getting the wire in there without having strands fold back is a pain sometimes. Also straight wire is prefered for me....
Code is 6363, go to menu, and look for something related to communication and input your info there. The RTU should have documentation inside of them guiding you how to configure BACnet settings.
It all depends on how the NET ports were setup when that controller was commissioned. They can be disabled for all you know and you won't get anywhere. First look at NET1 because that's the port...
Lol so speaking of the fuse, we had some balancers come out and play with the MT3 controller to adjust the OAD position and incidentally the controller died. Daikin told me to check the fuse and I...
Nope,
Getting ORCAview or a Delta licensed work bench is the only way to program and edit those objects and believe me, I tried cracking/breaking into it, it's hard. I don't know if a generic...
Yeah that's right, so they use this venturi valve to control airflow into the room and out of the room, so on the supply and return. Using that they can set different positive/negative static...
So I'm trying to modify my WEBS 4.10.1 workbench and there's only one theme, the Honeywell one and every time I modify anything it all, workbench doesn't want to open. Some error shows up on the...
Bump yeah I can't get my theme to show up under the drop down menu either.
Honeywell CIPer 10, CIPer30 and CIPer50 run Niagara natively.
Try running another station on it, or you can start from scratch, load a clean dist file on it, commission a different good working station and see if you got the same issue. Try the station on...
Heard Spyder5 unitary controllers are 5-8 months lead time as well
It should be grounded as well the power supply you're using should be as well but I doubt that is what's causing your issue. There's a thousand things that can cause your JACE to slow down. Start...
Insane, 13% increase in cost in controllers. What do you even do with that when you're bidding for projects, win the bid and hear this?
You're screwed unless you either got the physical USB key or an enteliweb license which only a vendor can purchase for you. For the enteliweb license, your DAC-1146E needs to be connected to a system...
Shout out to Gwilliams
Hmm well you're kinda screwed then man without buying the 4.9 Supervisor unless someones got the 4.9 modules.
What kind of points? Whenever I integrated this I would discover all the points I need over BACnet.
FYI they do have 4.9 JACEs on their site
How about tying into the BACnet network of the LMBCs to your JACE?
I don't think you can, when I used to commission/program Wattstopper they never gave/licensed me for their work bench so I was only able to access the JACE through a web browser. Only a Wattstopper...
I'm using the TC500 on a job right now, it's pretty straight forward and easy to setup. We connected it to a JACE wifi and discovered all the bacnet points, theoretically if you wanted too, you could...
Pictures of the diagram would be nice
You mean like having a modem connected to it and you forward the IP of the JACE to the modem and remote connect to the modem?
Always good, I have a yearly review and plan on doing so. Especially with inflation being as insane as it is right now.
Yeah I realized all of that, that wasn't really in my cards until later on. Luckily here non compete clauses aren't legal in Ontario so I could open a company if I wanted to but it needs a lot of...
Oh this is a new job, I left another controls company 6-7 months ago for this one because it pays much better. Pay here is pretty decent, that's not the issue. I just bought a place recently and I...