Post a reply to the thread: Copeland crankcase heater question
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
Originally Posted by dave1234 Yes- the smaller ones almost always say that. A resistive (I.e heater) load can operate at less voltage but in turn you'll get less in this case half the wattage- heat output. Sent from my iPhone using Tapatalk Actually it would be 1/4 the wattage.. i always remember that from a test question. With a fixed resistance if you cut the volts in half the watts decrease by quadruple Sent from my iPhone using Tapatalk
Yes- the smaller ones almost always say that. A resistive (I.e heater) load can operate at less voltage but in turn you'll get less in this case half the wattage- heat output. Sent from my iPhone using Tapatalk
Copeland crankcase heater question Part number : 560-2010-04 this heater comes with assorted compressors and has a tag on it that says 265 volts.. I don't know anything that has 265 volts...can I use this heater on a 110 volt compressor?
Copeland crankcase heater question
Forum Rules
