Reply to Thread

Originally Posted by Bazooka Joe

Clamp on meter, as in a Amp. Probe?

My Fluke 902 or any other meter for checking voltage, amps ,resistance.To check if the power is on!!!Also for trouble shooting electrical problems.

Crap. Forgot the quote thingy.

One from each hand.

Thanks vin or rundawg 👍🏻

Originally Posted by VTP99

R600 is still young 😁
If he's lucky his stories will be long too 😉

He is wide open too. Not good for safe conditions.

I used to be that way, nearly getting in dangerous situations a few times. Usually doing 2-3 man jobs alone.

Originally Posted by VTP99

Oh chit I'll assume you fell clear or someone else is a imposter of you

He made a right hand turn from the left lane. Smacked his fuel tank, bike spun under wheels, he got one of my shoes. Torn knee ligament, burn on neck from truck muffler. Only missed on day work.

R600 is still young 😁
If he's lucky his stories will be long too 😉

Originally Posted by ehsx

Only 2 motorcycle incidents. Minimal injuries, one bike run over by 18wheeler.

Oh chit I'll assume you fell clear or someone else is a imposter of you

I'll take it Best Bud wasn't one of them ?

Only 2 motorcycle incidents. Minimal injuries, one bike run over by 18wheeler.

Had a tech on a job where another tech got severe electrical burns due to slipping with wet shoes on concrete and falling into a starter.

Went over safety issues and procedures with him on the way to the job. Locked disconnect out and had him start repairs in starter. Got my biddle megger out to check the power wiring at the starter….wonder which line he is working on…found out real quick when he screamed an jumped back about 10’. He gave me a few new family names.🙂

How am I still here 💀
Don't get me started on motorcycle accidents 🙄

Oh wait, there was the other time I was standing inside the letter "O" of a mobile high-rise sign and reaching up to the top sockets got jolted.
Had I moved one foot back that would have resulted in falling about 80'
😲

My worse shock was servicing a marquee sign for a cinema.
I grabbed a ballast load line with several ballast on it.
It actually held on to me for several seconds before I involuntarily pulled off.
Had I been standing in water I probably wouldn't be typing this now. 😮

Originally Posted by R600a

Isn't the fist bump the recommended method of testing for a live cabinet? [emoji1787]

Thumb & forefinger

Originally Posted by VTP99

I ask my helper to touch it first [emoji2]

Isn't the fist bump the recommended method of testing for a live cabinet? [emoji1787]

I ask my helper to touch it first 😃

Originally Posted by Gleng

Most important tool to me is my Clamp meter.I like to know if the power is on or off !!!

Clamp on meter, as in a Amp. Probe?

Most important tool to me is my Clamp meter.I like to know if the power is on or off !!!

Originally Posted by R600a

I am sorry about your loss. I will keep you in my prayers.

Thanks brother.

Sent from my SM-N960U using Tapatalk