Post a reply to the thread: CRAC Shaft
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
https://www.google.com/url?sa=t&sour...EONsEjcv8T1Rb7 several companys make.split ball/ roller bearings if your shaft is good
Thanks people!!
No we had a flex collar up above where the 3 supplys came off , so once that was gone, up came the fan assem. It helped out with all the unit strut up above the crac unit. Just doing bearings about 5 hours.
Yeah someone messed up if they left you any kind of clearance there’s supposed to be a server above all lieberts it’s code.
buford Thx It is an upflow was hoping there easier way. LOL! Any issues that come up?
If it is a upflow with the fans in the top section, we lift the whole assem out from the top with chain falls, never done a shaft just bearings.
Model# VH380AUAAE0 Looking for serial info but figured I would give you what I got on hand. I have little to no clearance on sides or in back of unit.
A model # or series would help some of the deluxe 3 I’ve pulled from the side no fun at all.
CRAC Shaft Anyone every replace a Liebert CRAC fan shaft before? Looks like you have to remove from the top? I have one that bearings are being replaced and just in case looking for some input if things go awry.
CRAC Shaft
Forum Rules
