Post a reply to the thread: YORK 12.5 TON ROOF PACKAGE UNIT.
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
am not to good with load calculation or measuring square footage for large area at least at this time any basic idea would help
ok thanks
I’ll have to get it off my work phone. When I get home.
will be calling york monday 6/24/18,do have there direct tech support number ?
Should be a dry coil chart with that unit, or call York to get it, that will quickly and easily give you CFM.
thanks for responding will be going back to check all that
didnt check that yet,but will be checking static pressure
thanks for responding looks like sheatrock ceiling advised owner need to cut sheatrock nears vents where theres no air to me looks like not enough vents even if i was to connect it will still be noisy cause the package unit supply air duct is behind the wall of the air vents thats very load,after connecting ducts & still to much air do you guys recommand by pass damper between supply and return?
How many CFM is the unit moving, and at what static pressure?
Sounds like you should be inspecting the duct work to see why some supplies get a lot of air and others don't.
In a commercial environment, estimate the load by people and the number of square feet, and see if 12 1/2 tons is just right or if it's too much cooling, and then you're going to have to quote to connect any unconnected ductwork and try to manage the amount of air flow.
YORK 12.5 TON ROOF PACKAGE UNIT. Hello techs checked out york 12.5 ton package unit for PM,customer complained unit air vents to noisy,checked all vents in the office found some vents getting no air & some pushing so much air that when you close the manual louver in the vents it makes load windy noise like air wants to ecsape,i opened the pulley to where it wont affect pressures & tempto lower rpm but still not much different,i believe 1st they installed bigger size unit 2nd they never connected ducts for some areas cause vent are fully open but no air so thats air balancing issue as well,can any tech please give me advice how to solve this air problem i need to get back to owner. by the way not all vent are same size 15x15 & 12x8 are the air vents sizes trying to give much info as possible
YORK 12.5 TON ROOF PACKAGE UNIT.
Forum Rules