PDA

View Full Version : Entouch One lighting Controls and works with Entouch One LAN or WiFi as a device



HVAC-Doz
08-06-2013, 04:23 PM
411931411941

Entouch One lighting Controls

Works with Entouch One LAN or WiFi as a device <<<<<<< :det:
- Interior lighting
- Office zoning
- Sales floor lighting
- Stock rooms
- Hallways
- Dining Room

Exterior lighting
- Signage
- Parking lots
- Security
Other uses
- Facility load control

Wireless Networking
All settings are made remotely, no local programming required.

Supports motion detectors and photo sensors
Fully configurable to support a wide range of site needs.

Astronomic and local weather overrides
Schedules automatically adapt for sunrise, sunset, and weather

The EnTouch One Lighting Control Platform
Schedule and control interior lights, exterior signage,
parking lot lights, and other critical facility loads. The
EnTouch lighting control platform is designed to work
with our EnTouch One EMS family. Manage your
facilities through our cloud based system using your
computer, tablet, or mobile device.

411951

HVAC-Doz
08-11-2013, 03:06 PM
The Entouch One Family consist of Entouch One LAN or WIFI device. It is through this device you will connect the Entouch One Lighting Controls device.
You can also connect the Entouch One GM8 Energy monitor device.

Entouch One LAN or WIFI

413741
413771

Entouch One LAN or WIFI device Info

SPECIFICATIONS

Built in WiFi, Ethernet, or Cellular data communications
Built in gateway communicates between devices in building
Patent-pending HVAC control features reduce runtime and energy across multiple HVAC systems
High resolution color touchscreen display
Supports multiple stage heating and cooling
Intelligent fan modes to control comfort and humidity
Internal temperature and humidity sensors
Configurable support for external temperature sensor
Fully programmable 7 day scheduling with occupancy modes
365 day calendar support for special events and extended hold
Built in security features limit local user adjustments to temperatures and settings
Configurable outputs support humidifiers, dehumidifiers, ventilators, and other devices
Mappable inputs connect to CO2 sensors, motion detectors, security systems, and other devices
3 years Warranty
Sensors that you can use 10K Type 1, 2 or 3 or 20K Type 4 sensors. This mean the sensor already installed can be used.

Fan Failure to send E-mail setup info
Put a current switch on the fan power wire and then wired the current switch output to our L terminal on the EnTouch One.
Then set the L input to be an alarm setting with a normally closed contact (contact is based on the switch used).
Then they set it up in the portal to send out an email.

Entouch One GM8 Energy Monitor device.

413751

413761

Applications In-panel energy monitor for commercial AC panels

Panel Rating Three phase or single phase electrical panels up to 4,000 amps

AC Voltage 208VAC, 480VAC, and 600VAC inputs

Branch Loads Monitors one main input and up to eight branch loads

Wireless Data is transmitted wirelessly to an EnTouch One master controller. No external wiring required.

Current Sense Supports split core current transformers for rapid installation

Monitoring DSP-based monitoring provides high accuracy readings. Data collection every 60 seconds.

Remote Access Detailed energy data and daily total usage accessible through web browser or mobile devices



Entouch One Family ( Thermostat LAN or WIFI, Energy Monitoring and Lighting Controls) :patriot:

kc electrician
04-21-2017, 03:51 PM
looks nice