The test lab monkeys only make about 10.00 an hour. What do you expect?
Found this at a test lab for a highly talked about brand.
Proud supporter of Springfield Millers and Oregon Ducks.
The test lab monkeys only make about 10.00 an hour. What do you expect?
Looks suspiciously like one of my ex-helpers' work. I heard he went to McQua%.....
They're just testing in 'real world install' conditions!
Never knock on Death's door. Ring the bell and run, he hates that.
Views expressed here are my own and not neccessarily those of any company I am affiliated with.
All of the brazing at this lab are the same. The tests they were doing were quite interesting. This brand gets slammed all the time for quality and for being sold to anyone that can breathe. It could be that these are lab monkey's as stated earlier and are paid poorly. I fail to see any relevance in that as you would think the people that are in charge of testing would want near perfect conditions. At any rate, I thought it messy enough to post here. It was hot and very humid!
Proud supporter of Springfield Millers and Oregon Ducks.
Well, when the OP said "This brand gets slammed all the time for quality and for being sold to anyone that can breathe. " that left little doubt!
I always assumed that manufacture used Monkeys in the R & D department! It's the only explaination.
They just try to copy models of other brands, except made and sold cheaper!
I can compare them to Br**Burn vs name brand stuff like Honeywell and Totaline.
Br**burn thermostat techknowledgy is not even close to the name brands. Yet lots of dealers save a few bucks and install that crap everywhere and assume it's all made just same on the inside!
10-4 Payson. They did have a wide variety of other brands to inspect
Proud supporter of Springfield Millers and Oregon Ducks.
There must be $40.00 worth of silfaus in that one joint. Even I didn't solder that bad when I first started.
Everybody has the right to be stupid. Some people abuse the privilege.
so you missed the lecture about NO cameras too huh?
did you atleast tear it up in houston?
There wasn't allot to tear up, I did my best though. What camera? That was a burned mental image coupled to the usb port in my right nipple.
Proud supporter of Springfield Millers and Oregon Ducks.