ReplyHello and welcome! It kind of sounds like you are trying to advertise or sell these dollies?
You should read the site rules as if this is the case you must have permission to do so first!
Good luck.
Regular Guest
Found a line on equipment dolleys not sure if anyone needs one or not
call 615-860-5411.Will handle a 5 ton gas pack with ease.upto 800lbs
opens from 36" to 60" works great.
Professional Member
Hello and welcome! It kind of sounds like you are trying to advertise or sell these dollies?
You should read the site rules as if this is the case you must have permission to do so first!
Good luck.
Professional Member*
Down toward the bottom of the list of forums is one called the junkyard. It's used for selling or swapping things hvac/r related. That would be the appropriate place for this.Originally Posted by wheeler heat an
Regular Guest
saw were some people were looking for a dollie and i have a line of them just trying to share and make someones job a little easer
Regular Member
Kewl
In the Trade then?
Regular Guest
not at all
have a line of dollies that work great just trying to help make someons job a little easer do not want to break any rules new to this sight.sory
Regular Member
Being in trade is not a requirement to post here, but advertising ones product is forbidden "unless" one is a paid sponsor of the site.
Regular Guest
i have run service for over 30 years and am getting ready to retire in 2 mone wintersKewl
In the Trade then?
Regular Member
Awesome then, we have a few of us old guys here and we would like to welcome you to the site
The Mods and Regulars of the site like to keep the site spam and advertising free. You're opening post came across as one of the ones that we kick to the curb in a short manner
So get your post count up in the opens area's of the site and go "Pro" it's way mo better on the other side of the fence
Once again, welcome..
Professional Member*
Welcome to the site and good luck with retirement.
.
The statement below is my signature and just my overall feeling towards our industry and does not necessarily pertain to you nor this thread.
There really isn't a legitimate excuse for not doing the job correctly!
Posting Permissions
