More impressed with the " oh yes I can" mindset then the job. If its working its working. However I'm gonna come at you from a different angle. Lets look at this from the next tech that gets called to work on it. You rotten no good bottom feeding son of a hacking POS!! Is what I for see his impression being. Just saying. Someone eventually gonna have to try and figure out what the heck you were thinking.
It's not the brand of machine its the INSTALL you can have the best equitment and have it runied by a crappy install.
I must say that i'm skeptical of the whole shared return air wooden box configuration. I think I would have split up ra into zones for a more reliable and efficient system. I do like your condensate layout and will be borrowing for a dual 100k 10ton configuration this week. I'll post pics and take my lumps.
Call for Heat means get more firewood
A 7 year old thread comes to life!!!
But the GMS9 isn't a variable speed furnace like OP claimed, it's just a garden variety 1 stage with PSC motor. That's how he's getting by with the twinning or quadding.
If your happy with it that's what counts. Looks pretty typical. Nothing outstanding, electrical could be drastically improved but it's functional I guess.
ckartson
I didn't write the book I just read it!
Stopped by yesterday for a normal fall check up, nobody touches thus equipment but me and i havn't even changed an ignitor. cleaned the outside coils on the heatpumps spring and fall. never added freon or did anything to them still running like the energizer bunny!!!
There is no off switch to the genius mind!!
Motors run on smoke!! When the smoke comes out of it, it needs a new one!
no way to split the return it is all under concrete in a large shared return in a theatre
There is no off switch to the genius mind!!
Motors run on smoke!! When the smoke comes out of it, it needs a new one!
If you look it could not be simpler all thermostat wires run to seperate cube relays and clearly marked r,y,c, ....... you can check low voltage power to any unit without opening it up. If only others would think of the next guy, this is so simple that a 1st year could figure it out, if they cant they should not be working on equipment!!
There is no off switch to the genius mind!!
Motors run on smoke!! When the smoke comes out of it, it needs a new one!
Nice tin work....but man do I hate those square throat radius heal elbows. Those are the second worst elbows for turbulence and pressure loss. A square/square elbow without vanes is #1.
A standard square elbow with vanes would be 10x better.
___________________________
-supertek65Chicago is an indian word for stinky!!!!!!