+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Thread: Rinsing line set?

  1. #1
    Join Date
    Oct 2010
    Location
    Maryland
    Posts
    7
    Post Likes

    Rinsing line set?

    A bidding contractor- "flowing nitrogen is a pain. I just rinse with R12."

    Common?

    Lefty

  2. #2
    Join Date
    Apr 2008
    Location
    Pluto
    Posts
    984
    Post Likes
    God, that must be expensive. And illegal too.
    Not as lean, not as mean, but I'm still a hardcore, ass-kicking, hard charging Marine! Oohrah!

  3. #3
    Join Date
    Dec 2009
    Location
    maroon lazyboy
    Posts
    2,723
    Post Likes
    NOT COMMON.... HE'S ASKING FOR A BIG FINE???????

  4. #4
    Join Date
    Jul 2006
    Location
    Anytown USA
    Posts
    2,257
    Post Likes
    I usually rinse it with water.

  5. #5
    Join Date
    Feb 2006
    Location
    USA
    Posts
    4,381
    Post Likes
    how many ppl have actually been caught red handed venting into the atmosphere ?

  6. #6
    Join Date
    Oct 2010
    Location
    SW Michigan, near Battle Creek
    Posts
    921
    Post Likes
    If he is running r12 through it after braze the oxide is still in the pipe.
    r 12 he must be joking

  7. #7
    Join Date
    Jan 2005
    Location
    Denver, Colorado
    Posts
    306
    Post Likes
    Some old timers used r11 to flush. There is a current product called rx11 flush that you can use that doesn't really contain any r11. That stuff is expensive and a pain to use...much more so than nitro. Don't use that contractor...he sounds like a bit of a hack if he told you nitro brazing is too hard.
    Leadership...the ability to move forward even when you've burned your foot.

  8. #8
    Join Date
    May 2001
    Location
    Bennington, Vermont U.S.A.
    Posts
    13,856
    Post Likes
    Quote Originally Posted by y7turbo View Post
    I usually rinse it with water.
    That's some funny sh!t right there.

  9. #9
    Join Date
    Oct 2010
    Location
    Maryland
    Posts
    7
    Post Likes
    Thread Starter

    Thumbs up

    Thanks. Will steer clear.

    Lefty

  10. #10
    Join Date
    Mar 2005
    Location
    burlington county n.j.
    Posts
    9,881
    Post Likes
    Quote Originally Posted by y7turbo View Post
    I usually rinse it with water.
    add i little dish soap to get it shiny clean.......

  11. #11
    Join Date
    Sep 2008
    Location
    Western PA
    Posts
    26,690
    Post Likes
    Still gotta use nitrogen to push the flushing agent through.

    Why not do it right once and be done?


    R-12, huh.

    WOW.



  12. #12
    Join Date
    Sep 2010
    Location
    Dubuque, IA
    Posts
    117
    Post Likes
    I really thought it was a joke. YIKES!!!!

  13. #13
    Join Date
    Oct 2010
    Location
    STL
    Posts
    385
    Post Likes
    Quote Originally Posted by hvaccolo View Post
    Some old timers used r11 to flush. There is a current product called rx11 flush that you can use that doesn't really contain any r11. That stuff is expensive and a pain to use...much more so than nitro. Don't use that contractor...he sounds like a bit of a hack if he told you nitro brazing is too hard.
    actually I would contact the EPA and have them come out when the contractor is scheduled to then you get to earn half of his fine $$$$ LoL

  14. #14
    Join Date
    Dec 2007
    Location
    houston, texas
    Posts
    3,787
    Post Likes
    I call BS
    I'm not tolerating Political Correctness anymore, from now on it's tell it like it is.

    Veto Pro Pak - The best tool bag you'll ever own






  15. #15
    Join Date
    Oct 2010
    Location
    STL
    Posts
    385
    Post Likes
    Quote Originally Posted by Texas-Tech View Post
    I call BS
    Good point, I feel the poster might be the one trying this nonsense. There is not a whole lot if any hvac contractors dumb enough to do this sort of thing....well any that are still in business that is.

  16. #16
    Join Date
    Dec 2007
    Location
    houston, texas
    Posts
    3,787
    Post Likes
    Who could afford it? R-12, are you kidding
    I'm not tolerating Political Correctness anymore, from now on it's tell it like it is.

    Veto Pro Pak - The best tool bag you'll ever own






  17. #17
    Join Date
    Oct 2010
    Location
    SW Michigan, near Battle Creek
    Posts
    921
    Post Likes
    somebody here quotes the differance betwean genius and stupidity is that genius has limits

    think that applies here

  18. #18
    Join Date
    Jun 2010
    Location
    Hendersonville,NC
    Posts
    85
    Post Likes
    I was taught if you have to flush a system to flush it with a commercially available flushing agent. You still have to use nitrogen or argon to get it out of the system. I know at one time r-12 was how it was done. I for one would avoid any contractor who says he does things like this. It kinda makes me wonder what else this guy does the wrong way.

  19. #19
    Join Date
    Dec 2002
    Location
    Arizona
    Posts
    4,480
    Post Likes
    Quote Originally Posted by Texas-Tech View Post
    I call BS
    Heck the R12 cost more than the venting fine. LOL
    Make your expertise uniquely valuable.

    Make your influence uniquely far-reaching.

  20. #20
    Join Date
    Dec 2009
    Location
    maroon lazyboy
    Posts
    2,723
    Post Likes
    It is Bull Excrement

+ Reply to Thread
Page 1 of 2 12 LastLast

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •