Results 1 to 3 of 3

Thread: Rheem gas pak

  1. #1
    Join Date
    Jan 2006
    Posts
    110
    I have to service a 10 to 12 year old Rheem gaspak, can't get a model or serial no. off the decal on the side,due to weathering, info on compressor is boogered up, nothing on the control cover panel except wire diagram, nothing in the burner compartment, I know it's a 4 or 5 ton. Any ideas where else mdl. & ser. no.'s could be? Thanks
    "could be a law...don't know. James Gregory

  2. #2
    Join Date
    Oct 2003
    Posts
    2,866
    Originally posted by jayinsc
    I have to service a 10 to 12 year old Rheem gaspak, can't get a model or serial no. off the decal on the side,due to weathering, info on compressor is boogered up, nothing on the control cover panel except wire diagram, nothing in the burner compartment, I know it's a 4 or 5 ton. Any ideas where else mdl. & ser. no.'s could be? Thanks
    Whats the need of the model number? Go by the square footage of the house 600 ft per ton and guestimate it.

  3. #3
    Join Date
    Mar 2004
    Location
    SE Michigan
    Posts
    17,822
    Whats the hp on the blower motor?
    "Politicians are the lowest form of life on Earth. Liberal Democrats are the lowest form of politician"

    - General George S. Patton

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event