Have a Mt. Vernon with the following condition: No fuel feed or blower operation.
Red call light is on. Reset attempted; failed. Set to quad. Combustion "blower" does work at all settings.
Controller lights: Blue blink intermittent approx. 10 second interval , green on power up blink once only
Ignitor does work
Had some ash in vacuum tube leading from auger tube. Auger does not appear to be bound up. Fire pot clear, holes clear. Firebox clean unless panels can be accessed like the inserts can.
Hopper was 1/3 full can fill and retest if vacuum switch isn't being tripped.
Help? Assuming snap discs are okay and TC is good...no blinking yellow light?