Results 1 to 6 of 6
  1. #1
    Join Date
    Jul 2009
    Location
    texas
    Posts
    49

    opus install comparison

    what would yall think keep exsisting novar or upgrade to the latest and greatest opus or go on to cpc or danfoss one good thing about opus is that it uses alot of the current hardware

  2. #2
    Join Date
    Jul 2009
    Location
    texas
    Posts
    49

    lookin for some oppinions

    somebody must have a opinion

  3. #3
    Join Date
    Feb 2008
    Location
    California
    Posts
    2,069
    If you have the option...

    go with CPC or Danfoss

    both of them blow Novar out of the water.

    Our Wally Worlds are phasing their Novars over to E2's.

  4. #4
    Join Date
    Apr 2011
    Location
    Northeast Illinois
    Posts
    83
    I say stay away from Danfoss, their network sucks. Never had a problem with Novar. CPC is ok.
    Wally worlds in Chicago are installing Danfoss, nothing but problems, they've had to fly in techs and still couldn't figure out the problems.

  5. #5
    Join Date
    Jun 2009
    Location
    texas
    Posts
    56
    Well i would go with CPC but you already knew that

  6. #6
    Join Date
    Dec 2011
    Location
    USA
    Posts
    66
    I prefer CPC but the Danfoss can read quit a few different companies temperature and pressure sensors if you already have them installed.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event