Results 1 to 6 of 6
Thread: wood fireplace to insert
12-29-2011, 07:21 PM #1
wood fireplace to insert
I have a wood burning fireplace. how much trouble is it to go to an insert??It is what it is unless I say differently !!!!
12-29-2011, 07:31 PM #2
Wood insert or gas ??There is no bad beer, some just taste better than others.
12-30-2011, 03:41 PM #3
12-30-2011, 03:53 PM #4
I just did this for my Wife. (Christmas Present) For me getting the gas line through the outside to the inside of the fireplace was a little tricking (measurements had to be exact or It would look like poop.) Other than that, a direct vent insert fit right in. I picked up a model from Napolean fireplaces here in Ontario. I was surprised at how easy it was.
She loves it......Never give up; Never surrender!
12-30-2011, 08:40 PM #5
No big deal Papa, as long as you can get gas line there and liner ( or 2 ) down the chimney. You might want to get 120V up there as well if you go with fan option. You have a on/off switch on surround or put a remote controll on it and enjoy.There is no bad beer, some just taste better than others.
12-30-2011, 11:05 PM #6
Perform a Level II inspection first. Sweep out as much creosote as possible. Make repairs as necessary. The install per the code and listed instructions. Pretty easy.