Results 1 to 4 of 4

Thread: oven flame

  1. #1
    Join Date
    Jun 2006
    Posts
    308

    oven flame

    im working on an imperial commercial oven, notice the flame on the bottom ,for the oven, was low and not as high as the cooking flames..are they soppost to be that low . im going back after this weeking to finish the job. and to check the gas flow and to clean the burners as well........

  2. #2
    Thermostat might be stuck in bypass.

  3. #3
    Join Date
    Jun 2006
    Posts
    308
    good point , but thier low even when im calling for heat and off when not on call,

  4. #4
    Join Date
    Mar 2004
    Location
    So Cal
    Posts
    65
    Just wondering if you got this issue handled? Hollar if you need some help.
    Invensys Robertshaw Ranco RAM Fenwal Eliwell & some Paragon

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event