Results 1 to 12 of 12
Thread: Manitowoc ice error codes
-
12-23-2011, 06:49 PM #1
Guest
- Join Date
- Apr 2005
- Location
- where the beer flows like wine
- Posts
- 2,871
Manitowoc ice error codes
could anyone post the meaning of the flash codes. thanks!!!
-
12-23-2011, 07:12 PM #2
They had four safety limits starting with the B-Series machines. The last two were eliminated when the Q-Series came out (or was it the J?).
-
12-23-2011, 07:15 PM #3
Guest
- Join Date
- Apr 2005
- Location
- where the beer flows like wine
- Posts
- 2,871
Ice, what was the meaning of the four? b series.
-
12-23-2011, 07:52 PM #4
-
12-23-2011, 07:57 PM #5
Guest
- Join Date
- Apr 2005
- Location
- where the beer flows like wine
- Posts
- 2,871
Ice, thanks!!
what was #3?
-
12-26-2011, 04:45 PM #6
Professional Member
- Join Date
- Mar 2007
- Location
- Toronto
- Posts
- 258
3 was low discharge temp. You can put in a 50K resistor and forget about the thermistor altogether. This is as per factory.
-
12-26-2011, 05:36 PM #7
-
12-27-2011, 03:54 PM #8
#1 60 min freeze 6 consecutive cycles
#2 Max Harvest 3.5 mins 500 cycles (this was like 3 cycles on older models) 7 min on quad evaps
#3 Water system this is only on new S models
#3 was low discharge on some older models
Sorry didn't see the attachment earlier
-
12-27-2011, 04:32 PM #9
here is a zinger to throw you off...a SL3 on a quadziller water cooled is a Low Pressure fault.
-
12-27-2011, 04:57 PM #10
-
12-27-2011, 07:45 PM #11
Guest
- Join Date
- Apr 2005
- Location
- where the beer flows like wine
- Posts
- 2,871
-
12-28-2011, 09:52 AM #12


Reply With Quote


