Honeywell Jace and N2

[techservices]

Not familiar with the honeywell Jace ,only work with the Johnson FX series (Jace)
We will be given two Honeywell Jace
Are there cards I can install in the Honeywell to make all our Johnson N-2 controllers and V.M.A.'s visible on the Honeywell Jace Or does each Jace have to be specifically ordered.For that matter, what other proprietary buses can a Jace be configured to read

[tlp261]

You'd need an N2 license for the Honeywell Jace, which I don't believe JCI would provide.

[shylock]

For that matter, what other proprietary buses can a Jace be configured to read

Johnson will not licence you their N2 driver for Honeywell Jaces, but there is other N2 driver (Infocon) which you could use.

There are many drivers available, here is a list: http://hvac-talk.com/vbb/showthread.php?t=521202

[hvac69]

Call your distributor, Infocon has a N2 driver that works very well with any brand JACE and I have used them in Webs Jaces.

[steves4]

Not familiar with the honeywell Jace ,only work with the Johnson FX series (Jace)
We will be given two Honeywell Jace
Are there cards I can install in the Honeywell to make all our Johnson N-2 controllers and V.M.A.'s visible on the Honeywell Jace Or does each Jace have to be specifically ordered.For that matter, what other proprietary buses can a Jace be configured to read

Also consider using our S4 Open: BACnet-N2 Router with your Honeywell JACE. For more details check out our web site at http://www.thes4group.com or contact us directly. Contact info is in my profile. This product is a stand-alone device that integrates into the Metasys N2 bus, auto discovers the N2 devices, and maps the point list for you. Everything discovered is published to BACnet IP which your JACE can easily interface to.

[proxyking]

Stand alone device? Is this in addition to the jace?

[steves4]

Stand alone device? Is this in addition to the jace?

Yes. Our product is a stand alone network appliance.

[proxyking]

Yes. Our product is a stand alone network appliance.

Do Metasys Supervisory engines remain in service?
A Jace, and another device to translate to the Jace in bacnet?