Results 1 to 6 of 6
  1. #1
    Join Date
    Jan 2008
    Location
    East berlin, PA
    Posts
    281

    Welding leaking fryer tanks

    I have a customer with a Vulcan gas fryer and at the right side right under the right burner, there is a crust of oil crap where it's leaking oil. Doesn't drip till the thing gets hot....

    Is there anyway to weld these or is it not really worth the trouble?


    Thanks
    "Delay is preferable to error"- Thomas Jefferson

  2. #2
    Join Date
    Mar 2001
    Posts
    80
    Not worth the trouble.

    Bob

  3. #3
    Join Date
    Mar 2008
    Location
    Over the river and through the woods
    Posts
    116
    Vulcan does have a 10 year pro rated tank warranty....But the work has to be done by authorized Vulcan repair company....And it probably is not worth the hassle unless it is on tank in a bank of fryers.

  4. #4
    Join Date
    Sep 2008
    Location
    Pennsylvania
    Posts
    46
    Not worth welding, Is a fire hazard though. Have seen many fryer fires due to cracked vats

  5. #5
    Join Date
    Jan 2008
    Location
    East berlin, PA
    Posts
    281

    Thanks

    will let them know....kind of what I figured, but I wanted a second opinion.
    "Delay is preferable to error"- Thomas Jefferson

  6. #6
    Join Date
    Jul 2007
    Location
    Columbus, Ohio/ Bagram, Afghanistan
    Posts
    54
    A leaking frypot is to a fryer what a cracked heat exchanger is to a furnace. It needs to be replaced! PERIOD! And save yourself some hassle and change out the high limit and thermostat at the same time. No sense putting the old controls into a new pot then finding out that the stuffing boxes no longer seal properly.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event