Results 1 to 5 of 5

Thread: EWC controls

  1. #1
    Join Date
    Jan 2005
    Posts
    61
    Hi all,I'm trying to get the status codes on a BMplus 2000. 2 zones. the manufacturer only display's the 3000 model. I e-mailed to try to get the info. I hope they responr as this client has a dedicated room to maintain. a hint, he Hunts with the V.P. SSSSSSHHHHHHHHHHHHHH. hope the black cars don't roll up,lol

  2. #2
    Join Date
    Jan 2004
    Location
    PA
    Posts
    68,803
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

  3. #3
    Join Date
    Jan 2005
    Posts
    61
    hi beenthere, clicked on the site, got nothing there

  4. #4
    Join Date
    Jan 2004
    Location
    PA
    Posts
    68,803
    Staus led... 3 short, and 1 long blink, proccessor operating normally.

    A 1 sec blink indicates panel is in supply air limit mode.

    A rapid blink indicates the supply air sensor is shorted or open.

    The w1/b led indicates the panel is in heat mode.
    The y led the compressor is energized.
    The g led the fan is operating.

    This is in the PDF I linked to.
    You may have to download it to read it.
    Also has trouble shooting chart.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

  5. #5
    Join Date
    Jan 2005
    Posts
    61

    Talking

    thanks for your reply.good help is hard to find.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event