Results 1 to 4 of 4

Thread: old registers

  1. #1
    Join Date
    Nov 2002
    Location
    minnesota
    Posts
    200
    I have an older home and would like to replace some of the old registers -----they are return registers that measure----
    OD--12 x 16 with taper of about 1 inch at the top to two inches at the bottom.
    I have tried Hart and Cooley and did find the style that I presently have.

    thanks

  2. #2
    Join Date
    Nov 2002
    Location
    minnesota
    Posts
    200
    Sorry posted too soon and did a poor job of proof reading
    I could NOT find the registers that I need at the Hart and Cooley site

  3. #3
    Join Date
    Jul 2004
    Location
    Poughkeepsie, Ny
    Posts
    632
    Originally posted by dairyman
    I have an older home and would like to replace some of the old registers -----they are return registers that measure----
    OD--12 x 16 with taper of about 1 inch at the top to two inches at the bottom.
    I have tried Hart and Cooley and did find the style that I presently have.

    thanks
    Remove one of the grills and take it to a supply house to see if anyone else makes them. They maybe able to point you in the right direction. Hart and Cooley make a lot of different grills and they don't show all of them on the web site. Or call a local HVAC company and the may also be able to help you in your dilema
    Happiness is the only good. The time to be happy is now. The place to be happy is here. The way to be happy is to make others so.
    -Robert Green Ingersoll

  4. #4
    Join Date
    Nov 2005
    Location
    Orange County Calif
    Posts
    128
    Titus makes alot of special one as well........

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event