Page 1 of 2 12 LastLast
Results 1 to 13 of 25
  1. #1
    Join Date
    Jul 2000
    Location
    Guayaquil EC
    Posts
    10,320

    Manitowoc Control Board 76-2782-3

    This is a control board for a Manitowoc J-Series machine which has been sitting on the shelf in the truck way too long.

    The tag says it's good for J and G-Series but I don't buy that, so I'm saying it's for the J-Series only...but it works for either 115V or 230V.

    It new and in its original box, but it's been opened and recently tested OK on a J600 at my shop.

    The current wholesaler price for this little gem is $450, but I'm only looking for $250 ...plus freight (+ tax if it's shipped to Florida. )

    Also, I have just listed it on Ebay, so you can check it out over there:
    http://www.ebay.com/itm/150685521691...84.m1555.l2649

    Thanks for looking.
    Attached Images Attached Images  

  2. #2
    Join Date
    Dec 2003
    Location
    Citrus County, Florida
    Posts
    1,509
    Do you still have this board?
    Doug

  3. #3
    Join Date
    Dec 2003
    Location
    Citrus County, Florida
    Posts
    1,509
    great, will call the client and see if he still wants the machine fixed. I will have to go back and re-prove that it is bad. I'm laid up today as I just came back from a prostate biospy and have a sore butt

    I'll take a few days.

    thanks

    safe holidays
    Doug

  4. #4
    Join Date
    Jul 2000
    Location
    Guayaquil EC
    Posts
    10,320
    Quote Originally Posted by Gunslinger View Post
    Do you still have this board?
    Yes, it's still available.

  5. #5
    Join Date
    Jul 2000
    Location
    Guayaquil EC
    Posts
    10,320
    Quote Originally Posted by icemeister View Post
    Yes, it's still available.
    Doug,

    Sorry...

    I checked again and I found this board was sold. I do have some other new and good used ones available.

    Let me know what machine you need it for and I'll try to get you matched up when I get back to the shop tomorrow.

  6. #6
    Join Date
    Dec 2003
    Location
    Citrus County, Florida
    Posts
    1,509
    I'm pretty sure it is a Q602
    Doug

  7. #7
    Join Date
    Jul 2000
    Location
    Guayaquil EC
    Posts
    10,320
    Doug,

    I checked my stock of boards and I do have a 25-1130-3, which is the original board for J and Q-Series machines. (The 76-2782-3 is the service replacement board for it.)

    It's used (salvaged from a Q600) and has been run tested at the shop.

    The price is $100.00 plus shipping and sales tax.


    If you're interested, let me know.

  8. #8
    Join Date
    Dec 2003
    Location
    Citrus County, Florida
    Posts
    1,509
    Sounds good, I will get in contact with the client after the weekend.

    thanks

    be safe
    Doug

  9. #9
    Join Date
    Jul 2000
    Location
    Guayaquil EC
    Posts
    10,320
    I hold it for you.

    Have a good Holiday.

  10. #10
    hey icemeister you wouldn't happen to have a spare 76-2782-3 board im current;y fixing a manitowoc QY0604A and i need that control e-mai me at reyesl201@yahoo.com or call me im leo 559-358-9153 i would appreciate that very muh

    Leo Reyes

  11. #11
    Join Date
    Jul 2000
    Location
    Guayaquil EC
    Posts
    10,320
    Quote Originally Posted by reyesl201 View Post
    hey icemeister you wouldn't happen to have a spare 76-2782-3 board im current;y fixing a manitowoc QY0604A and i need that control e-mai me at reyesl201@yahoo.com or call me im leo 559-358-9153 i would appreciate that very muh

    Leo Reyes
    The 76-2782-3 was sold already, but I have a couple of good, used 25-1130-3 boards (See post #7 above). The 25-1130-3 was the original board whereas the 76-2782-3 is the service replacement board.

  12. #12
    yes im interested icemeister in the 25-1130-3, board how much warranty do you give me and where can send you the money give me contact info thanke you
    leo

  13. #13
    Join Date
    Jul 2000
    Location
    Guayaquil EC
    Posts
    10,320
    Quote Originally Posted by reyesl201 View Post
    yes im interested icemeister in the 25-1130-3, board how much warranty do you give me and where can send you the money give me contact info thanke you
    leo
    Email me. My contact info is in my profile. (Just click on my username.)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event