i was wondering the best way to check a board on a rtu to make sure it is defective?
Please see forum rules.
"If anybody can draw on the power, where do we put the meter?" - JP Morgan before pulling Tesla funding
Due to our Forum Rules we are not allowed to discuss step by step instructions or repairs in this area.
You may want to register in the Pro area and fill in your credentials. That is where we can discuss technical issues.
Find a Contractor by clicking here
So you can post in the AOP areas, Click here to get your * by your Pro Membership title.
Main Site Rules
How to become a Pro Member
NEW HTALK MEMBERSHIP MAP Click on additions/add marker
swap boards from an identical RTU and see if the unit operates correctly. Put suspect board in the one other board came out of. If the problem goes to the other RTU.........Bingo! Would this be a Trane ( Voyager or Precedent)?