-
UNIT SIZE?
Aside from the compressor name plate and NO TXV, how else can you find out what size a packaged unit is w/o a unit name palte?
-
I've seen some evap coils with production quality control sticker telling the coil size. Other than that IF you have serial number you can call the supplyhouse even without model# and they will tell you.
I guess if you have a metering device you may try calling the supplyhouse with the metering device size to see if they can "come up with something" but its really as good as guessing by the size of the house (not too good).
-
TXV and reversing valves
 Originally Posted by txcanes13
Aside from the compressor name plate and NO TXV, how else can you find out what size a packaged unit is w/o a unit name palte?
should not be used to check equipment tonage. They are often different from tonage of compressor.
-
 Originally Posted by second opinion
should not be used to check equipment tonage. They are often different from tonage of compressor.
I agree but if you have the compressor model you may get lucky calling the distributor for that brand and they finding the only packaged unit in their line that uses such compressor.
-
BTW, why do you need tonage of system? if you don't mind.
-
If the unit lost all tags, then it must be old.
If just to repair it, then who cares what size.
If replace it, then you best to use the "Better guess" called "load cal"
-
 Originally Posted by just_opinion
If the unit lost all tags, then it must be old.
If just to repair it, then who cares what size.
If replace it, then you best to use the "Better guess" called "load cal"
Hence my last question. LMAO
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Related Forums
The place where Electrical professionals meet.
|