Results 1 to 4 of 4

Thread: Trane Everyware

  1. #1
    Join Date
    Apr 2006
    Location
    Columbus, Ohio
    Posts
    802

    Trane Everyware

    I just got the trane everyware software. I was wondering does it connect to older comm 4 WSHP TUC controllers point type 39? I also was wondering what plugs/cables are needed? Is there a pin out to make your own?

    Thank You
    J. King

  2. #2
    Join Date
    Dec 2006
    Location
    Hartford, Connecticut
    Posts
    442
    Yes it can. I used it a lot for VAV UCMs and TUCs on WSHPs, FCUs and UVs

    In addition to the software, Eware has a 9 to 25 pin cable, a comm 4 adaptor, an RJ11 cable and an adaptor with alligator clips.

  3. #3
    Join Date
    May 2004
    Location
    SE Pennsylvania
    Posts
    939
    Will Eware communicate with Type I comm 3 VAVs? I have the Eware kit, 3.5 inch floppy, a win 95 laptop, plus I may even have the original instructions inscribed in stone. Am I correct that Rover will not?

  4. #4
    Join Date
    Apr 2006
    Location
    Columbus, Ohio
    Posts
    802
    Quote Originally Posted by twisted pair View Post
    Yes it can. I used it a lot for VAV UCM’s and TUC’s on WSHP’s, FCU’s and UV’s

    In addition to the software, Eware has a 9 to 25 pin cable, a comm 4 adaptor, an RJ11 cable and an adaptor with alligator clips.
    I was told some black box universal RS232 to RS485 converter will work with Everyware. I have a link to one from black box. Will this one work? http://www.kvms.com/Product/IC820A.aspx

    If not could someone give me a link to one that they know works? Thanks!
    J. King

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event