Water source heat pumps
I posted in general before I seen this one
I have been trying to find the manufacturer's recommended suction /discharge pressure, superheat/sub cooling temps. for mammoth water source heat pumps. As usual it isn't on the nameplate and I haven't had any luck with the available literature
I have one that has a suction press. of 75 and a head press. of 200. the coils and filter is clean and the water flow is set at the factory setting. The suction pressure seems to be a little high and the head pressure a little low. It could be the reversing Viv leaking by and I still have to retrieve the trip out code when it trips.
I'm currently applying for the pro section but have to submit the required documentation. I am also currently licensed, have my EPA number, NATE certified until 2013. and just recently received a Diploma from a tech school.
Any help will be greatly appreciated
I suggest you start here. Your local rep should be able to get you what you need.
Politicians need to be changed like diapers, and for the same reason.
(read it somewhere)
hydroband/Sol.A.Terra 1/Sol.A.Terra 2
I have some info on them,if this is the models you have.
The model # is E025HHH size 010-064 horizontial. I have all the manuals that come with it but as a lot of them there isn't that much information. I have tried to find some info on their web site but there isn't much there either. I thought maybe there might be someone out there that has worked on this type that might have better detailed information.
Originally Posted by NRG$WIZ
Just finding the time to try a rep is another thing.
Last edited by Hardwater; 09-23-2011 at 04:37 PM.