4 Ton 17" Wide Air Handlers

[BigDog91]

Anyone out there know if there is such a beast. Been looking all afternoon and have had no luck. Only have 18" of width to get this thing in with out reinventing the wheel.

Thanks.

[BaldLoonie]

If you can live with a "light" 4 ton, the Nordyne modular blowers MB6EM and MB6VM-1600B are 17.5" wide. The EM which is X13 is 1550 CFM at .3 ESP and 1480 at .5. The VM variable speed units are 1390 at a reasonable static. Need to be matched with a cased coil.

[DirkRoper]

I hope you're at sea level (or lower). We struggle at 4,500 feet, I typically oversize my blower by one size for insurance that I have enough cfm.

[BigDog91]

Thanks. I'll take a look at the Nordyne.

[BigDog91]

Yes we are at sea level so this unit might work. It is a conference room in a small hotel so not much duct.

[DirkRoper]

Four tons seems like a lot for a conference room. I have a customer that converted an equipment room to a conference room but hasn't changed the a/c yet. It's miserable when the a/c kicks on - instantly cold, far too noisy, far too drafty.