Results 1 to 6 of 6
  1. #1
    Join Date
    Apr 2010
    Location
    Sussex County, Delaware
    Posts
    87

    4 Ton 17" Wide Air Handlers

    Anyone out there know if there is such a beast. Been looking all afternoon and have had no luck. Only have 18" of width to get this thing in with out reinventing the wheel.

    Thanks.

  2. #2
    Join Date
    May 2000
    Location
    Indianapolis, IN, USA
    Posts
    34,607
    If you can live with a "light" 4 ton, the Nordyne modular blowers MB6EM and MB6VM-1600B are 17.5" wide. The EM which is X13 is 1550 CFM at .3 ESP and 1480 at .5. The VM variable speed units are 1390 at a reasonable static. Need to be matched with a cased coil.

  3. #3
    Join Date
    Jun 2009
    Location
    Nevada
    Posts
    139
    I hope you're at sea level (or lower). We struggle at 4,500 feet, I typically oversize my blower by one size for insurance that I have enough cfm.

  4. #4
    Join Date
    Apr 2010
    Location
    Sussex County, Delaware
    Posts
    87
    Thanks. I'll take a look at the Nordyne.

  5. #5
    Join Date
    Apr 2010
    Location
    Sussex County, Delaware
    Posts
    87
    Yes we are at sea level so this unit might work. It is a conference room in a small hotel so not much duct.

  6. #6
    Join Date
    Jun 2009
    Location
    Nevada
    Posts
    139
    Four tons seems like a lot for a conference room. I have a customer that converted an equipment room to a conference room but hasn't changed the a/c yet. It's miserable when the a/c kicks on - instantly cold, far too noisy, far too drafty.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event