Bryant 355MAV042080 furnace and Aprilaire 700
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2005
    Posts
    16
    I have Aprilaire 700 Humidifier installed on Bryant 355MAV042080 furnace controlled via Evolution Control.
    Humidifier runs whenever the fan is on. I normally run fan for continuous circulation. Is there the way wiring it so the humidifier will only go on when both the fan and the heat are on?

    Any help would be greatly appreciated.

    Mark

  2. #2
    Join Date
    Nov 2000
    Posts
    50
    Yes, you need to go into the advanced settings and tell it "No" to the "Run with fan" setting under the humidifier setup.



  3. #3
    Join Date
    Sep 2005
    Posts
    16
    Yes,

    That was a fix. I discovered that solution soon after posting.

    Thanks, anyway!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event