Results 1 to 3 of 3

Thread: Relocation

Hybrid View

  1. #1
    Join Date
    Jan 2005
    Location
    Detroit Michigan
    Posts
    53

    Relocation

    Was working on a walk-in cooler for a new customer, box temp would get below, 45 degrees, after looking over the unit, and trying to adjust the superheat on the tx-valve was getting some really strange reading. Pulled the insulation off of the pipe and the bulb come right out of the clamps. Not to mentions the bulb was acroos two pipe joints.
    Attached Images Attached Images  

  2. #2
    Join Date
    Dec 2002
    Location
    SouthEast NC ICW & Piedmont Foothills
    Posts
    7,619
    at least it wasn't still coiled up
    It`s better to be silent and thought the fool; than speak and remove all doubt.

  3. #3
    Join Date
    Jan 2005
    Location
    Detroit Michigan
    Posts
    53
    True, but a little common sense goes a long way, Or some training might go a little futher.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event