Results 1 to 6 of 6

Thread: Burners

  1. #1
    Join Date
    Dec 2005
    Posts
    2
    When the burners ignite, the burner flame is normal until the blower starts. At this time, continuous roll out occurs. What is the problem???? And what it continuous roll out???

  2. #2
    Join Date
    Mar 2004
    Location
    SE Michigan
    Posts
    17,821
    A cracked heat exchanger and carbon monoxide come to mind.
    "Politicians are the lowest form of life on Earth. Liberal Democrats are the lowest form of politician"

    - General George S. Patton

  3. #3
    Join Date
    Dec 2005
    Posts
    2
    Thank You!!!!

  4. #4
    Join Date
    Nov 2005
    Location
    donegal pa
    Posts
    4
    sure sounds like a cracked heat exchanger to me to.
    i agreewith coolwhip 100%

  5. #5
    Yep, it's time to call a competent professional to diagnose the problem and either make the required adjustments or get a quote for a new heat exchanger/furnace.

  6. #6
    Join Date
    Jan 2002
    Location
    Ft.Worth,Tx
    Posts
    4,584

    Thumbs down Dangerous-Turn off

    This is not good , I would suggest that you turn your unit off and get electric heaters until you have your unit checked by service company..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event