Proper condenser fan motor size.
I was working on an old trane package unit. The tag indicates a 1/3hp fan motor. The replacement motor that had been replaced a few years back was a 3/4hp 1075 rpm.
The blade was in bad shape so I got one that was close to original. I put on a 1/3 hp 1075 motor . And it was pulling almost 3 amps. Motor is rated for 2 amps.
Is there a way to figure a good replacement motor.
A good supply shop should be able to get the correct motor for you based on the rpm required and the diameter, pitch and number of blades on the fan. They have charts that will get you the right size hp for whatever you want. Thank you very much
Originally Posted by cchc
“I could have ended the war in a month. I could have made North Vietnam look like a mud puddle."
"I have little interest in streamlining government or in making it more efficient, for I mean to reduce its size. I do not undertake to promote welfare, for I propose to extend freedom. My aim is not to pass laws, but to repeal them. It is not to inaugurate new programs, but to cancel old ones that do violence to the Constitution."
Thank you got it taken care of.