"Do It Right"

[matticus]

"'Heating and Cooling" is the name of the company that hacked this one in. I am 100% serious. Not sure if that is schedule 40 or sdr21 for the electrical service.....

Someone was proud enough of their work to put their company name on this wow just wow!

[coolerguy]

I thought i have seen it all

[Rcb2875]

What is the huge pile of something they are trying to use to seal the roof penetration? The sheet hiding that death trap must have blow off sometime after they got paid.

[mdharris68]

A little explanation is in order here. Have you ever heard the stories about the cultured people that own a lot of convenience stores here in the good old USA and they like to beat you down on the price of your work and are slow payers? Well the guy who did this work was low bidder. Go figure....

[jstone1982]

"'Heating and Cooling" is the name of the company that hacked this one in. I am 100% serious. Not sure if that is schedule 40 or sdr21 for the electrical service.....

For starters there is more to this picture. The owners of this gas station wanted to do all they could for the lowest cost. They were given an estimate for fitted plat-forms and also an estimate for the electric and roof penetration sleeves. They didn't want to spend the extra money so they did it themselves. As far as the equipment installation goes the owners knew up-front what could happen if the unit wasn't installed with the right equipment curb under it. They were in a hurry and needed refrigeration to sell products immediately. Since the last 4 contractors have been jacking up the previous system while putting 134a in a 502 system. Which not to mention any names, was the company that posted this picture and really does not do any business in the area for that reason.

[pauls heating &]

so i guess you do their work now,then when you try to get paid "you give me discount " on the bill cause "that too much " ??

[meplumber]

For starters there is more to this picture. The owners of this gas station wanted to do all they could for the lowest cost. They were given an estimate for fitted plat-forms and also an estimate for the electric and roof penetration sleeves. They didn't want to spend the extra money so they did it themselves. As far as the equipment installation goes the owners knew up-front what could happen if the unit wasn't installed with the right equipment curb under it. They were in a hurry and needed refrigeration to sell products immediately. Since the last 4 contractors have been jacking up the previous system while putting 134a in a 502 system. Which not to mention any names, was the company that posted this picture and really does not do any business in the area for that reason.

You gotta be kidding me. Right? There is never an excuse to do work that shotty. Either you do it right or you walk away. That is your name on it. Have some freakin pride in your trade. Pathetic. I would fire my employees for doing something like that.

[hvacvegas]

For starters there is more to this picture. The owners of this gas station wanted to do all they could for the lowest cost.
Which is every gas station that ever existed.
They were given an estimate for fitted plat-forms and also an estimate for the electric and roof penetration sleeves. They didn't want to spend the extra money so they did it themselves.
Time to walk.

As far as the equipment installation goes the owners knew up-front what could happen if the unit wasn't installed with the right equipment curb under it.
Yeah. They could deny that anyone told them. Then when it falls off they play the blame game, and it comes back on your company for being the knowlegable person. Hate to tell you this, but ANY court would side against you if this falls off and hurts someone. YOU knew it was unsafe, and since YOUR the professional, you shouldn't have created the hazard.

They were in a hurry and needed refrigeration to sell products immediately.
Heaven forbid, safety gets in the way of profit margins.

Since the last 4 contractors have been jacking up the previous system while putting 134a in a 502 system. Which not to mention any names, was the company that posted this picture and really does not do any business in the area for that reason.

dork.

[71CHOPS]

am reading this right? the person that installed this just came on here to "defend" this abortion?

[qwerty hvac]

This is a first! Someone defending their crappy work..

[pauls heating &]

funny thing...lol..then ya get a call back--- you fix for free--under warranty--

[ryan1088]

You gotta be kidding me. Right? There is never an excuse to do work that shotty. Either you do it right or you walk away. That is your name on it. Have some freakin pride in your trade. Pathetic. I would fire my employees for doing something like that.

^^^
That pretty much covers it all.

[Joehvac25]

Good stuff!