Results 1 to 4 of 4
  1. #1
    Join Date
    Nov 2005
    Location
    Augusta, Ga
    Posts
    3
    I have a Rheem HVAC unit and it has stopped working. The flame does not light when power is applied to the system.

    The unit has a Direct Spark Ignition Control (Part # G766BCA-1) and the LED lights for about 30 Seconds once power is restored to the system and then goes completely off. There are no on/off cycles present or flashing of the LED during this process.

    Can anyone please advise me as to where to start first?

    Thanks

  2. #2
    Join Date
    Mar 2005
    Location
    burlington county n.j.
    Posts
    9,743
    in the yellow pages under HEATING CONTRACTORS

  3. #3
    Join Date
    Apr 2004
    Posts
    7,680
    Dont double post.

  4. #4
    Mod01 Guest

    Thumbs up

    Please, call a professional. Your family's safety is worth it.

    Thanks, Mod01.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event