Results 1 to 1 of 1
Thread: Enviro-Tec HLP 40 FCU
08-20-2011, 08:09 PM #1Professional Member
- Join Date
- Jan 2007
- N.E. KS
Enviro-Tec HLP 40 FCU
I have an Enviro-tech fan coil unit that I am trying to figure out the drain pan situation. These units have oversized insulated drain pans that catch the condensate. But from what I can see the bottom of the coils have a sheet metal covering. This cover has condensate drops all over it on the ends where I can see. Is there supposed to be a hole out in the middle of this cover? Of all of the units that I have looked at, I cant see above the large drain pan and under the coils. These installs are so tight I can't get my head up there and can't see anything with a mirror. I am not removing humidity and I think the condensate is getting blown into the air stream.
Any help appreciated.Some people know the cost of everything but the value of nothing.