Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2011
    Posts
    39

    Keyston 3 way valve issue

    Hey Guy's haveing trouble with a 3 way Keystone (Biffi) valve for my Cooling tower. The actuator motor broke free of the mount so I had to remount it. Now the card (Peak Electronics MKT-136) is coming up faulted whenever I put power to it? Anyone have any idea how to calibrate it??

  2. #2
    Join Date
    Jun 2009
    Location
    StL, MO
    Posts
    592
    The MKT is a mounting kit for a positioner, i.e. DMC-100A. Calibration, installation and etc. are covered pretty well by Peak's positioner data sheets.
    http://www.peaktronics.com/index.php...heets&Itemid=3
    UA LU 562

  3. #3
    Join Date
    Jun 2011
    Posts
    39
    Hi Dave thank's much I actually was able to coax this info from the Mfg. Peaktronics.
    Thanks again!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event